ATS-14G-202-C2-R0 / Advanced Thermal Solutions, Inc.

ATS-14G-202-C2-R0 Datasheet with Chat AI

Hello, Please ask a question about ATS-14G-202-C2-R0 Datasheet

# Example questions: ➢ What materials are used to construct this heatsink assembly (including the push pin)?
➢ What are the dimensions of the heatsink, specifically values for a, b, and e as listed in the document?
➢ What is the thermal resistance of this heatsink under different airflow conditions (as indicated in the thermal performance chart)?

Part No.	ATS-14G-202-C2-R0
Manufacturer	ATS
Size	162 Kbytes
Pages	1 page
Description	pushPIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766

Datasheet Summary with AI

Here's a summary of the information from the provided text:

Product: Heat Sink (Part Number: ATS-XXXX, likely)

Manufacturer: Advanced Thermal Solutions, Inc. (ATS)

Part Number Example: ATS-XXXX (likely, as the full number isn't provided).

Key Features and Information:

️· Thermal Performance: The heat sink's performance (measured by thermal resistance) varies with airflow. At an airflow of 781.9 CFM, the thermal resistance is 0.54 °C/W.
️· Dimensions:
- Dimension A (Length): 54 mm
- Dimension B (Width): 40 mm
- Dimension C (Height): 23 mm
- Dimension E (Hole Distance): 38 mm
- Dimension F (Hole Distance): 53.5 mm
️· Material: Not explicitly stated, but typical heat sinks are made of aluminum or copper.
️· Compliance: RoHS-6 compliant (meaning it meets certain environmental regulations regarding hazardous substances).
️· Contact Information: 89-27 Access Road, Norwood, MA 02062 USA. Phone: 781.769.2800. Website: www.qats.com

Important Notes:

️· The document appears to be a datasheet or product specification sheet.
️· The full part number is incomplete (ATS-XXXX).
️· The provided thermal resistance values are dependent on airflow conditions.

Product: Heat Sink (Part Number: ATS-XXXX, likely)

Manufacturer: Advanced Thermal Solutions, Inc. (ATS)

Part Number Example: ATS-XXXX (likely, as the full number isn't provided).

Key Features and Information:

️· Thermal Performance: The heat sink's performance (measured by thermal resistance) varies with airflow. At an airflow of 781.9 CFM, the thermal resistance is 0.54 °C/W.
️· Dimensions:
- Dimension A (Length): 54 mm
- Dimension B (Width): 40 mm
- Dimension C (Height): 23 mm
- Dimension E (Hole Distance): 38 mm
- Dimension F (Hole Distance): 53.5 mm
️· Material: Not explicitly stated, but typical heat sinks are made of aluminum or copper.
️· Compliance: RoHS-6 compliant (meaning it meets certain environmental regulations regarding hazardous substances).
️· Contact Information: 89-27 Access Road, Norwood, MA 02062 USA. Phone: 781.769.2800. Website: www.qats.com

Important Notes:

️· The document appears to be a datasheet or product specification sheet.
️· The full part number is incomplete (ATS-XXXX).
️· The provided thermal resistance values are dependent on airflow conditions.