전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

MC74HC165A Datasheet with Chat AI
  • AIauthorized

    Hello, Please ask a question about MC74HC165A Datasheet

  • # Example questions: ➢ What happens to the minimum high-level output voltage (voh) as the output current (iout) increases, according to the provided data?
    ➢ What is the maximum low-level input voltage (vil) for a supply voltage of 4.5v?
    ➢ What is the minimum high-level output voltage (voh) when the output current (iout) is 4.0ma and the supply voltage is 0v?

  • Part No.MC74HC165A
    ManufacturerONSEMI
    Size112 Kbytes
    Pages12 pages
    Description8-Bit Serial or Parallel-Input/Serial-Output Shift Register
    Datasheet Summary with AI

    Please note: Because this is an image, there could be minor errors in my transcription. The formatting will also be different from the original document.


    Document Source: ON Semiconductor

    Device (Inferred, not stated directly): It's likely describing characteristics for a logic family or microcontroller. A specific part number isn't provided in this excerpt.

    Key Table: Digital Input/Output Characteristics

    This table describes the input and output voltage levels (VIH, VIL, VOH, VOL) for a digital logic device under specific conditions.

    General Notes:

    ️· Vin = VIH or VIL: This refers to the input voltage level being either the High-level input voltage (VIH) or the Low-level input voltage (VIL).
    ️· Iout: This refers to the output current.
    ️· Unit: V = Volts, mA = Milliamps

    Specific Table Values (Three Separate Cases based on Iout Values):

    I'm separating this into three cases, one for each level of output current being tested (2.4mA, 4.0mA, 5.2mA) because the voltage thresholds change.

    Case 1: Iout = 2.4mA

    Parameter Condition VCC (Volts) VIH (V) VIL (V) VOH (V) VOL (V)
    Digital Input Characteristics 3.0
    Digital Input Characteristics 4.5
    Digital Input Characteristics 6.0

    Case 2: Iout = 4.0mA

    Parameter Condition VCC (Volts) VIH (V) VIL (V) VOH (V) VOL (V)
    Digital Input Characteristics 3.0
    Digital Input Characteristics 4.5
    Digital Input Characteristics 6.0

    Case 3: Iout = 5.2mA

    Parameter Condition VCC (Volts) VIH (V) VIL (V) VOH (V) VOL (V)
    Digital Input Characteristics 3.0
    Digital Input Characteristics 4.5
    Digital Input Characteristics 6.0

    Additional Observations:

    ️· The table is incomplete. There are values missing (blank cells) for many of the parameters at the different VCC levels.
    ️· It appears the datasheet is specifying the characteristics for different supply voltages (VCC) – 3.0V, 4.5V and 6.0V.

    Please note: Because this is an image, there could be minor errors in my transcription. The formatting will also be different from the original document.


    Document Source: ON Semiconductor

    Device (Inferred, not stated directly): It's likely describing characteristics for a logic family or microcontroller. A specific part number isn't provided in this excerpt.

    Key Table: Digital Input/Output Characteristics

    This table describes the input and output voltage levels (VIH, VIL, VOH, VOL) for a digital logic device under specific conditions.

    General Notes:

    ️· Vin = VIH or VIL: This refers to the input voltage level being either the High-level input voltage (VIH) or the Low-level input voltage (VIL).
    ️· Iout: This refers to the output current.
    ️· Unit: V = Volts, mA = Milliamps

    Specific Table Values (Three Separate Cases based on Iout Values):

    I'm separating this into three cases, one for each level of output current being tested (2.4mA, 4.0mA, 5.2mA) because the voltage thresholds change.

    Case 1: Iout = 2.4mA

    Parameter Condition VCC (Volts) VIH (V) VIL (V) VOH (V) VOL (V)
    Digital Input Characteristics 3.0
    Digital Input Characteristics 4.5
    Digital Input Characteristics 6.0

    Case 2: Iout = 4.0mA

    Parameter Condition VCC (Volts) VIH (V) VIL (V) VOH (V) VOL (V)
    Digital Input Characteristics 3.0
    Digital Input Characteristics 4.5
    Digital Input Characteristics 6.0

    Case 3: Iout = 5.2mA

    Parameter Condition VCC (Volts) VIH (V) VIL (V) VOH (V) VOL (V)
    Digital Input Characteristics 3.0
    Digital Input Characteristics 4.5
    Digital Input Characteristics 6.0

    Additional Observations:

    ️· The table is incomplete. There are values missing (blank cells) for many of the parameters at the different VCC levels.
    ️· It appears the datasheet is specifying the characteristics for different supply voltages (VCC) – 3.0V, 4.5V and 6.0V.

    Part No.MC74HC165A
    ManufacturerONSEMI
    Size112 Kbytes
    Pages12 pages
    Description8-Bit Serial or Parallel-Input/Serial-Output Shift Register
    ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

    Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
    All Rights Reserved©Alldatasheet.com


    Mirror Sites
    English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
    Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
    Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
    Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
    Family Site : ic2ic.com  |   icmetro.com