# HVP I/P TRANSDUCER

## Ordering Information

· Model Code: HVP-[1]-R[2]
· [1] Input:
- A: 4 – 20 mA DC (Input resistance 250 Ω)
- 6: 1 – 5 V DC (Input resistance 1 MΩ min.)
· [2] Options:
- Output: Various pressure ranges (e.g., 0.2 – 1.0 kgf/cm2, 20 – 100 kPa, 3 – 15 psig)
- Pneumatic Connection: Rc 1/4" or 1/4" NPT fitting

## General Specifications

· Construction: Plug-in
· Connections: M3.5 screw terminals (torque 0.8 N·m) for input/power; Rc 1/4" or 1/4" NPT (torque ≤ 12 N·m) for pneumatic.
· Material: Flame-resistant resin (housing), die cast aluminium (base socket & valve section).

## Input & Output Specifications

· Input:
- DC Current: Shunt resistor attached (0.5 W)
· Output: Various pressure ranges; output falls below 0% if input loop is open.
- Max. air delivery/exhaust: 60 Nl/minute (2.1 SCFM)

## Installation & Environmental Conditions

· Supply Pressure: 140 kPa (±10%) - use dry, filtered air.
· Air Consumption: 6 Nl/minute (0.21 SCFM)
· Current Consumption: Approx. 30 mA
· Operating Temperature: -5 to +55°C (23 to 131°F)
· Operating Humidity: 30 to 90 %RH (non-condensing)
· Mounting: Surface or Standard Rack Mounting Frame (BX-16H)
· Weight: 400 g (0.88 lb)

## Performance

· Accuracy: ±0.3 %
· Linearity: ±0.2 %
· Repeatability: 0.1 %
· Temp. Coefficient: ±0.05 %/°C
· Response Time: ≤ 3 sec.
· Insulation Resistance: ≥ 100 MΩ
· Dielectric Strength: 500 V AC / 1500 V AC

## External Dimensions