1. Product Overview:

️· Product: M2PV Pressure Transmitter / Pressure Sensor
️· Manufacturer: M-System (http://www.m-system.co.jp/)
️· Function: Measures pressure and converts it into an electrical signal.

2. Ordering Information/Model Number:

️· Model Number: M2PV (followed by configuration codes - not detailed in this document, but the codes determine specific features and ranges).

3. Technical Specifications:

️· Pressure Range: Not explicitly stated, but assumed to be configurable based on model number.
️· Output Signal: Electrical signal (unspecified type - likely 4-20mA, 0-5V, etc. based on configuration)
️· Operating Temperature: -5 to +55°C (23 to 131°F)
️· Operating Humidity: 30 to 90% RH (non-condensing)
️· Mounting: Surface or DIN rail
️· Weight: 150 g (0.33 lb)
️· Power Consumption (DC): Approximately 3W
️· Accuracy: ±0.3% of span
️· Temperature Coefficient: ±0.03 %/°C (±0.02 %/°F)
️· Response Time: ≤ 0.5 seconds (0-90%)
️· Permissible Overpressure: 196 kPa (2.0 kgf/cm², 1.96 bar, 28 psi)
️· Line Voltage Effect: ±0.1% over voltage range
️· Insulation Resistance: ≥ 100 MΩ with 500 V DC
️· Dielectric Strength: 2000 V AC @ 1 minute (output to power to ground)

4. Certifications and Compliance:

️· EU Conformity: Complies with EMC and Low Voltage Directives.
️· RoHS Directive: Compliant (Restriction of Hazardous Substances).
️· Approval: UL/C-UL nonincendive Class I, Division 2 and general safety requirements.

5. Dimensions (Refer to diagram):

️· Refer to diagram for dimensions. The diagram lists dimensions in both metric and imperial units. Key features include: Pneumatic Coupler mount, DIN Rail compatibility, and Mounting Hole placement.

6. Schematic Circuitry & Connection Diagram:

️· Shows a simplified block diagram illustrating the input (pressure) and output (electrical signal) connections, along with internal components such as “U(+)” and “V(–)”.

7. Important Notes:

️· Mounting: No extra space is needed between units during mounting.
️· Configuration: The "M2PV" model number is followed by configuration codes to customize features and pressure ranges. These codes are not detailed in the document.