1. Product Overview:

️· What it is: The M6NVS is a signal isolator. This means it takes a signal (either voltage or current) from one circuit and replicates it in another, electrically isolated circuit. This isolation is crucial for safety, noise reduction, and preventing ground loops.
️· Manufacturer: M-System
️· Model Number: M6NVS-[1][2]-[3][4] - The model number uses codes to define the input type, output type, power supply, and options.

2. Ordering Information & Codes:

️· Model Structure: `M6NVS-[1][2]-[3][4]`
- `[1]` - Input Type (Current or Voltage)
- `[2]` - Input Range (e.g., 4-20mA, 0-10V)
- `[3]` - Output Type (Current or Voltage)
- `[4]` - Options (Power Supply, Response Time, Standards, Coatings)

3. Input Types ([1]):

️· Current:
- A: 4-20mA (50Ω)
- B: 2-10mA (100Ω)
- C: 1-5mA (200Ω)
- D: 0-20mA (50Ω)
- E: 0-16mA (50Ω)
- F: 0-10mA (100Ω)
- G: 0-1mA (1000Ω)
- H: 10-50mA (20Ω)
- Z: Specify (custom range)
️· Voltage:
- 3: 0-1V (1MΩ)
- 4: 0-10V (1MΩ)
- 5: 0-5V (1MΩ)
- 6: 1-5V (1MΩ)
- Z: Specify (custom range)

4. Output Types ([3]):

️· Output types are not explicitly listed. From the general descriptions, it can be deduced that they mirror the input types: Current or Voltage. It would need more specification based on specific applications.

5. Options ([4]):

️· Power Supply:
- M2: 100-240VAC (Operational range: 90-264VAC, 47-66Hz) - *Not UL listed*
- R: 24VDC (Ripple limit: 10%p-p)
️· Response Time:
- Blank: Standard (≤ 0.5 seconds)
- /K: Fast Response (Approx. 3.5ms for voltage, 25ms for current)
️· Standards & Approvals:
- Blank: CE Marking
- /UL: UL Approval & CE Marking
️· Coatings:
- /C01: Silicone Coating
- /C02: Polyurethane Coating

6. Specifications & Performance:

️· Input Resistance: Defined by input type (e.g., 50Ω, 1000Ω).
️· Minimum Span: 100mV for voltage inputs.
️· Offset: Maximum 1.5x the span.
️· Accuracy: ±0.1%
️· Temperature Coefficient: ±0.01%/°C
️· Line Voltage Effect: ±0.1%
️· Insulation Resistance: ≥ 100 MΩ
️· Dielectric Strength: 2000VAC
️· Operating Temperature: -20 to +55°C
️· Operating Humidity: 30 to 90%RH
️· Power Consumption: Max. 2VA (AC), Approx. 0.5W (DC)

7. Physical Characteristics:

️· Mounting: DIN Rail or installation base
️· Weight: 60g
️· Recommended solderless terminal dimensions: See diagrams

8. Regulatory Compliance:

️· EMC: EN 61000-6-4 & EN 61000-6-2
️· Low Voltage Directive: EN 61010-1
️· RoHS: EN 50581
️· UL/CSA (for /UL option)

Key Considerations:

️· Custom Ranges: The 'Z' code allows for custom input ranges, but requires contacting M-System for specific details.
️· Power Supply Selection: AC power option (M2) is *not* UL listed.
️· Response Time: Consider the impact of response time on application performance.
️· Coating: Select a coating based on environmental conditions.