ATS-14G-208-C1-R0 / Advanced Thermal Solutions, Inc.

ATS-14G-208-C1-R0 Datasheet with Chat AI

Hello, Please ask a question about ATS-14G-208-C1-R0 Datasheet

# Example questions: ➢ What are the dimensions of the heatsink, specifically what do the values for dimensions a, b, and c represent?
➢ How does the thermal performance of the heatsink change with varying airflow rates, as indicated in the provided data?
➢ What materials or certifications demonstrate the heatsink's compliance with environmental standards?

Part No.	ATS-14G-208-C1-R0
Manufacturer	ATS2
Size	161 Kbytes
Pages	1 page
Description	pushPIN™ HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM

Datasheet Summary with AI

Here's a summary of the information provided, broken down into categories:

1. Product Description:

️· Type: Heat Sink
️· Part Number: ATS-xxxx (Specific part number not provided)
️· Manufacturer: Advanced Thermal Solutions, Inc. (ATS)
️· Dimensions: 70mm x 70mm x 65mm (estimated from the provided data, not explicitly stated).
️· Finish: Anodized Black

2. Performance Data (Thermal Resistance):

️· Airflow: Data provided assumes forced convection (airflow).
️· Thermal Resistance (undercut):
- 0.42 °C-cm²/W (at 1.3 m/s)
- 0.67 °C-cm²/W (at 0.5 m/s)

3. Materials & Finish:

️· Material: Aluminum (likely 6063 aluminum, common for heat sinks)

️· Finish: Anodized Black (provides corrosion resistance and improved heat radiation).

4. Contact Information:

️· Address: 89-27 Access Road, Norwood, MA 02062 USA
️· Phone: 781.769.2800
️· Fax: 781.769.9979
️· Website: [www.qats.com](http://www.qats.com)

5. Important Notes/Disclaimers:

️· This document (R2-0917) is subject to change without notice.
️· For further technical information, contact Advanced Thermal Solutions, Inc.
️· The provided data is based on specific testing conditions. Actual performance may vary.

1. Product Description:

️· Type: Heat Sink
️· Part Number: ATS-xxxx (Specific part number not provided)
️· Manufacturer: Advanced Thermal Solutions, Inc. (ATS)
️· Dimensions: 70mm x 70mm x 65mm (estimated from the provided data, not explicitly stated).
️· Finish: Anodized Black

2. Performance Data (Thermal Resistance):

️· Airflow: Data provided assumes forced convection (airflow).
️· Thermal Resistance (undercut):
- 0.42 °C-cm²/W (at 1.3 m/s)
- 0.67 °C-cm²/W (at 0.5 m/s)

3. Materials & Finish:

️· Material: Aluminum (likely 6063 aluminum, common for heat sinks)
️· Finish: Anodized Black (provides corrosion resistance and improved heat radiation).

4. Contact Information:

️· Address: 89-27 Access Road, Norwood, MA 02062 USA
️· Phone: 781.769.2800
️· Fax: 781.769.9979
️· Website: [www.qats.com](http://www.qats.com)

5. Important Notes/Disclaimers:

️· This document (R2-0917) is subject to change without notice.
️· For further technical information, contact Advanced Thermal Solutions, Inc.
️· The provided data is based on specific testing conditions. Actual performance may vary.