| 전자부품 데이터시트 검색엔진 |
|
The question interval is too short.
Please try again in a few seconds.
Hello, Please ask a question about HCF40110BEY Datasheet
# Example questions:
➢ What type of components should not be used with stmicroelectronics products without express written approval?
➢ What is the maximum clock frequency for the hcf40110b when vdd is 5v?
➢ What is the typical value for the pulse width (tw) when vdd is 10v?
1. Device Overview:
️· Type: Counter/Divider IC. Specifically, it's a decade counter/divider, meaning it counts in powers of 10.
️· Logic Family: CMOS – low power consumption and good noise immunity.
️· Package: Plastic DIP-16 (Dual In-line Package with 16 pins).
️· Supply Voltage (VDD): Can operate at 5V, 10V, or 15V.
2. Key Electrical Characteristics (Highlights):
️· Static Performance: Information about Input High Voltage, Input Low Voltage, Leakage Currents, and Output Drive.
️· Dynamic Performance: (This section is substantial)
- Propagation Delays: Times it takes for signals to propagate through the counter (important for maximum operating frequency). Delays are dependent on the supply voltage (5V, 10V, 15V).
- Pulse Widths: Minimum pulse widths for clock signals and reset signals.
- Maximum Frequency: Specifies the maximum clock frequency that the counter can operate at, dependent on the supply voltage (VDD).
️· Input/Output Loading: Details on how much current the inputs and outputs can drive.
️· Power Dissipation: Details on how much power the device will consume.
3. Functional Description:
️· Decade Counter: Divides the input clock frequency by 10. Each clock pulse advances the counter to the next decimal digit.
️· Asynchronous Reset: Can be reset to zero using an external signal.
️· Synchronous Inputs: Used for cascading counters or performing specific counting operations.
4. Pins:
️· The pins are not explicitly labeled in this document, but it is implied that there are clock input, data input, reset, carry-out, and various Q outputs (representing the decimal digits).
5. Mechanical Data:
️· Details on the physical dimensions of the Plastic DIP-16 package.
️· Dimensions provided in both millimeters (mm) and inches.
6. Important Notes:
️· Legal Disclaimer: STMicroelectronics assumes no responsibility for the use of this information.
️· Not for Life Support: The device is not authorized for use in life support applications without express written approval.
In essence, the HCF40110B is a versatile decade counter/divider IC that can be used in a variety of digital logic applications, such as frequency division, event counting, and timing control.
1. Device Overview:
️· Type: Counter/Divider IC. Specifically, it's a decade counter/divider, meaning it counts in powers of 10.
️· Logic Family: CMOS – low power consumption and good noise immunity.
️· Package: Plastic DIP-16 (Dual In-line Package with 16 pins).
️· Supply Voltage (VDD): Can operate at 5V, 10V, or 15V.
2. Key Electrical Characteristics (Highlights):
️· Static Performance: Information about Input High Voltage, Input Low Voltage, Leakage Currents, and Output Drive.
️· Dynamic Performance: (This section is substantial)
- Propagation Delays: Times it takes for signals to propagate through the counter (important for maximum operating frequency). Delays are dependent on the supply voltage (5V, 10V, 15V).
- Pulse Widths: Minimum pulse widths for clock signals and reset signals.
- Maximum Frequency: Specifies the maximum clock frequency that the counter can operate at, dependent on the supply voltage (VDD).
️· Input/Output Loading: Details on how much current the inputs and outputs can drive.
️· Power Dissipation: Details on how much power the device will consume.
3. Functional Description:
️· Decade Counter: Divides the input clock frequency by 10. Each clock pulse advances the counter to the next decimal digit.
️· Asynchronous Reset: Can be reset to zero using an external signal.
️· Synchronous Inputs: Used for cascading counters or performing specific counting operations.
4. Pins:
️· The pins are not explicitly labeled in this document, but it is implied that there are clock input, data input, reset, carry-out, and various Q outputs (representing the decimal digits).
5. Mechanical Data:
️· Details on the physical dimensions of the Plastic DIP-16 package.
️· Dimensions provided in both millimeters (mm) and inches.
6. Important Notes:
️· Legal Disclaimer: STMicroelectronics assumes no responsibility for the use of this information.
️· Not for Life Support: The device is not authorized for use in life support applications without express written approval.
In essence, the HCF40110B is a versatile decade counter/divider IC that can be used in a variety of digital logic applications, such as frequency division, event counting, and timing control.
| Part No. | HCF40110BEY |
| Manufacturer | STMICROELECTRONICS |
| Size | 430 Kbytes |
| Pages | 10 pages |
| Description | DECADE UP/DOWN COUNTER/DECODER/LATCH/DRIVER |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |