1. Document Type:

️· This appears to be a datasheet or product specification sheet for a series of inductors, specifically "AHC30-R[value]M-RC" inductors. It’s likely intended for engineers or purchasing personnel.

2. Manufacturer:

️· Allied Components International (contact info provided: 714-665-1140, website: www.alliedcomponents.com)

3. Product Series:

️· AHC30-R[Value]M-RC: This is the product series name. The `[Value]` placeholder indicates different inductance values are offered within this series.

4. Product Specifications Table:

The core information is presented in a table. Here's a breakdown of the columns and what they represent:

️· Allied Part Number: The full part number (e.g., AHC30-R15M-RC)
️· Inductance (µH): The inductance value, measured in microhenries. Ranges from 0.15 µH to 56 µH.
️· Tolerance (%): The permissible deviation from the stated inductance value. Typically 20% for lower values and 10% for higher values.
️· Q Min: The minimum Quality factor (Q) - a measure of the inductor's efficiency.
️· Test Frequency (MHz): The frequency at which the Q and other specifications are tested.
️· SRF Min (MHz): The Self-Resonant Frequency, measured in Megahertz. This is the frequency at which the inductor begins to behave like a capacitor.
️· DCR Max (Ω): The DC Resistance, measured in Ohms. This represents the internal resistance of the inductor.
️· Rated Current (mA): The maximum DC current the inductor can handle without exceeding its temperature limits.
️· Notes: This section contains additional notes about specific inductors or specifications.

5. Important Specifications and Ranges (Summary):

️· Inductance Range: 0.15 µH to 56 µH
️· Test Frequencies: Vary (70MHz, 55MHz, 60MHz, 65MHz, and 2.52MHz)
️· Rated Current: From 30mA to 1850mA
️· Revision Date: March 25, 2008

6. Other Information:

️· Marking: Inductors are marked with either an EIA code (on tubing) or no marking (on varnish parts). Reel markings include manufacturer name, part numbers, invoice number, and date code.
️· Packaging: 200 pieces per bag.
️· Revision Notice: "All specifications subject to change without notice." - a standard disclaimer.

Essentially, this document provides detailed technical information for a line of inductors, allowing users to select the appropriate part for their applications.