MC30A-120K-RC / Allied Components International

MC30A-120K-RC Datasheet with Chat AI

Hello, Please ask a question about MC30A-120K-RC Datasheet

# Example questions: ➢ What is the dcr max. value for the mc30a-270k-rc part number?
➢ What test equipment is recommended for measuring the inductance and q factor of a component with an inductance between .01µh and 82µh?
➢ What is the maximum operating temperature for these molded chip inductors?

Part No.	MC30A-120K-RC
Manufacturer	ALLIED
Size	370 Kbytes
Pages	1 page
Description	Molded Chip Inductors

Datasheet Summary with AI

## Test Equipment
· (L/Q) measurements: HP4287A + HP16034E (.01µh~82µh); HP4292A + HP16034E (100µh~470µh)
· (RDC): HP4284A + HP42841A/WK3260B
· (SRF): HP4291A

## Physical Specifications
· Packaging: 500 pieces per 7 inch reel
· Marking: EIA Inductance Code

## Part Number Table
|Inductance (µh)|Tolerance (%)|Q (Min.)|Test Freq. (MHz)|SRF (Min.) (MHz)|DCR (Max.) (Ω)|IDC (mA)|
|---|---|---|---|---|---|---|
|10-1000|10|50|2.52/.796|20-8|1.6-7|250-30|
*Refer to table for specific values.*

## Notes
· Specifications subject to change without notice.
· Available in tighter tolerances.

# MC30A Molded Chip Inductors

## Features
· 1812 Molded Chip Inductor
· Welded internal lead frame to coil
· Excellent Solder Heat Resistance
· Available in 5%, 20% tolerances

## Electrical Characteristics
· Inductance Range: 10µh ~ 1000µh
· Test Frequency: 10µh ~ 82µh @ 2.52MHz; 100µh ~ 820µh @ .796MHz
· Operating Temperature: -25ºC ~ +85ºC @ 75% RH
· IDC (Current): Current at which inductance drops no more than 10% at 1MHz, 1V.

## Resistance to Soldering Heat
· Pre-heating: 150ºC, 1min
· Solder Composition: Sn/Ag3.0/Cu0.5
· Solder Temperature: 245 ± 5ºC
· Immersion Time: 4 ± 1sec

## Test Equipment
· (L/Q) measurements: HP4287A + HP16034E (.01µh~82µh); HP4292A + HP16034E (100µh~470µh)
· (RDC): HP4284A + HP42841A/WK3260B
· (SRF): HP4291A

## Physical Specifications
· Packaging: 500 pieces per 7 inch reel
· Marking: EIA Inductance Code

## Part Number Table

Inductance (µh) Tolerance (%) Q (Min.) Test Freq. (MHz) SRF (Min.) (MHz) DCR (Max.) (Ω) IDC (mA)

10-1000 10 50 2.52/.796 20-8 1.6-7 250-30

*Refer to table for specific values.*

## Notes
· Specifications subject to change without notice.
· Available in tighter tolerances.