 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
The question interval is too short.
Please try again in a few seconds.
Hello, Please ask a question about GA32C1 Datasheet
# Example questions:
➢ What are the load capacitance options, and what does 'series' refer to in the context of load capacitance?
➢ What are the available options for frequency tolerance/stability and where can more detailed information be found?
➢ What is the storage temperature range for these crystals, and how does it compare to the operating temperature ranges?
| Part No. | GA32C1 |
| Manufacturer | CALIBER |
| Size | 51 Kbytes |
| Pages | 1 page |
| Description | UM-1, UM-4, UM-5 Microprocessor Crystal |
1. General Information & Identification:
️· Type: Crystal Oscillator.
️· Revision: 1994-B
️· Main Focus: It appears to be documenting a range of crystal oscillators with varying frequency and tolerance specifications.
️· Customization: Factory contact is encouraged for custom specifications.
2. Frequency Specifications (Applies to all four frequency ranges documented):
️· Frequency Range: 10.000MHz to 150.000MHz
️· Frequency Tolerance/Stability: See above for details, and various options. Tolerance and stability depend on the chosen combination of options (A, B, C, D, E, F, G, H).
️· Operating Temperature Range: See options "C", "E", and "F".
- “C” Option: 0°C to 70°C
- “E” Option: -20°C to 70°C
- “F” Option: -40°C to 85°C
3. Detailed Electrical Specifications (Applies to all four frequency ranges documented):
️· Aging @ 25°C: Options for aging are listed, with a maximum of ±5 ppm per year.
️· Storage Temperature Range: -55°C to 125°C
️· Load Capacitance ("S" Option): Series, 8pF to 50pF
️· Shunt Capacitance: 7pF Maximum
️· Insulation Resistance: 500 Megaohms Minimum at 100Vdc
Key Options & Abbreviations Explained:
️· A, B, C, D, E, F, G, H: These likely represent different codes for frequency tolerance and stability options. The datasheet suggests looking "above" (within the table with the Frequency Tolerance/Stability heading) for specific values depending on which combination of these codes is selected.
️· "S" Option: Refers to the "Series" load capacitance.
️· XX Option: Refers to the numerical value of the load capacitance, ranging from 8pF to 50pF.
️· ppm: Parts per million – a common unit for measuring frequency tolerance and aging.
Important Notes & Where to Find More Information:
️· Contact Factory for Custom Specs: This sheet outlines standard options, but custom specifications are available by contacting the manufacturer.
️· 'See Above': Several specifications reference values found "above" in the table.
️· Full Specification: This document isn't necessarily *everything*. It’s a summary of key details.
1. General Information & Identification:
️· Type: Crystal Oscillator.
️· Revision: 1994-B
️· Main Focus: It appears to be documenting a range of crystal oscillators with varying frequency and tolerance specifications.
️· Customization: Factory contact is encouraged for custom specifications.
2. Frequency Specifications (Applies to all four frequency ranges documented):
️· Frequency Range: 10.000MHz to 150.000MHz
️· Frequency Tolerance/Stability: See above for details, and various options. Tolerance and stability depend on the chosen combination of options (A, B, C, D, E, F, G, H).
️· Operating Temperature Range: See options "C", "E", and "F".
- “C” Option: 0°C to 70°C
- “E” Option: -20°C to 70°C
- “F” Option: -40°C to 85°C
3. Detailed Electrical Specifications (Applies to all four frequency ranges documented):
️· Aging @ 25°C: Options for aging are listed, with a maximum of ±5 ppm per year.
️· Storage Temperature Range: -55°C to 125°C
️· Load Capacitance ("S" Option): Series, 8pF to 50pF
️· Shunt Capacitance: 7pF Maximum
️· Insulation Resistance: 500 Megaohms Minimum at 100Vdc
Key Options & Abbreviations Explained:
️· A, B, C, D, E, F, G, H: These likely represent different codes for frequency tolerance and stability options. The datasheet suggests looking "above" (within the table with the Frequency Tolerance/Stability heading) for specific values depending on which combination of these codes is selected.
️· "S" Option: Refers to the "Series" load capacitance.
️· XX Option: Refers to the numerical value of the load capacitance, ranging from 8pF to 50pF.
️· ppm: Parts per million – a common unit for measuring frequency tolerance and aging.
Important Notes & Where to Find More Information:
️· Contact Factory for Custom Specs: This sheet outlines standard options, but custom specifications are available by contacting the manufacturer.
️· 'See Above': Several specifications reference values found "above" in the table.
️· Full Specification: This document isn't necessarily *everything*. It’s a summary of key details.
| Part No. | GA32C1 |
| Manufacturer | CALIBER |
| Size | 51 Kbytes |
| Pages | 1 page |
| Description | UM-1, UM-4, UM-5 Microprocessor Crystal |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼ 
English
Chinese
German
Japanese
Russian
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand