I. General Information & Ordering Notes (Applies to Both Documents)

️· Dimensions: Dimensions are shown in Inches (mm).
️· Specifications Subject to Change: Specifications and dimensions are subject to change.
️· Website: www.ck-components.com

II. Series 7000 Miniature Toggle Switches - Document 1 (Pages F-5 & F-6)

️· Actuators:
- L, L1, L2: .840", .640", .550" High
- L1P, L2P: Antirotation, .840", .640", .550" High
- S: .420" High
- SP: Antirotation, .420" High
- M: .200" High
- MP: Antirotation, .200" High
- T: .687 (17,45) High
- TP: Antirotation, .687 (17,45) High, 15/32 Bushing
- T1: .487 (12,37) High
- T1P: Antirotation, .487 (12,37) High, 15/32 Bushing
- T2P: Flattened, Antirotation, .610" High, 15/32 Bushing
️· Bushing: Bushing option code not required unless CW splashproof bushing ordered.
️· Locking Levers: (KXX, K1XX) Available with or without threaded bushing, threaded models have keyway.
- Two-Position, Three-Position, and One-Position lock options.
️· Lever Handles: (L40, L41, L42) - Available with matte or gloss plastic finish
️· Wiring: For 3-way switch wiring, see Section N.
️· Finish Notes: Black hardware specified when either black actuators or bushings are specified.

III. Series 7000 Miniature Toggle Switches - Document 2 (Pages F-6 & F-7)

️· Actuator Restrictions:
- L, L1, L2, M, S & TXX actuators not available with Y1 bushing.
- L1P, L2P, MP, P1, P3, P4, SP & TXX actuators not available with D8 & H4 bushing.
️· Actuator Anti-Rotation: Provides anti-'push-in' feature.
️· Locking Lever Notes:
- Locking levers must be lifted before being actuated, then will lock in place.
- Overtightening mounting nut may cause actuator to bind.
️· Actuator Options:
* K2 Locking lever with threaded
* K9 Locking lever without threaded
* K12 Locking lever with threaded
* K19 Locking lever without threaded
️· Bushing Restrictions Add .070 for certain bushings, subtract .020 for others.

IV. Key Terminology & Codes

️· CW: Splashproof bushing (requires a specific bushing option code)
️· Antirotation: Prevents actuator from spinning when force is applied.
️· Keyway: Slot for keying the actuator in a particular orientation.

Essentially, these documents are a combination of product specifications and ordering guidelines for a series of miniature toggle switches. They detail the available actuator types, bushing options, locking features, and any restrictions on combinations. Let me know if you want me to focus on a specific aspect or combination of these points.