# ACTF9011/915.0/DCC6C SAW RF Filter

## General Description
️· Low-loss, compact, and economical SAW RF filter.
️· Designed for mobile communications ISM900 systems.
️· Provides low insertion loss and high attenuation.
️· Centre Frequency: 915.00 MHz

## Package & Pin Configuration
️· Surface-mount ceramic DCC6C case.
️· Laser Marking.
️· Pin Configuration:
- 2: Input / Output
- 5: Output / Input
- 1, 3, 4, 6: Case Ground

## Dimensions (DCC6C)
️· See table in original document.

## Performance

Maximum Ratings
️· Input Power Level (P): 10 dBm
️· DC Voltage (VDC): 12 V
️· Operable Temperature Range (TA): -10 to +60 °C
️· Storage Temperature Range (Tstg): -40 to +85 °C

Electronic Characteristics
️· Nominal Centre Frequency (fC): 915.000 MHz
️· Usable Pass Bandwidth (BW): 26 MHz
️· Insertion Loss (902.00 – 928.00 MHz): 3.5 - 5.0 dB
️· Inband Ripple (Δα, 902.00 – 928.00 MHz): 1.5 dB
️· Absolute Attenuation (α): Values provided for various frequency ranges (DC - 2000 MHz) – see detailed table.

## Important Notes
️· Electrostatic Sensitive Device - observe handling precautions.
️· Frequency fC is the midpoint between 3dB frequencies.
️· Specifications depend on impedance matching component values and quality.
️· Specifications subject to change or obsolescence without notice.
️· Equipment designs utilizing this product must be approved by government agencies.
️· Liability is limited to the SAW component itself.



## Contact Information
️· Tel: +44 118 979 1238
️· Fax: +44 118 979 1283
️· Email: info@actcrystals.com
️· Website: http://www.actcrystals.com
️· Address: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK