3.5MM FEMALE TO 2.4MM Datasheet(PDF) - ACS770XCB

제조업체	부품명	데이터시트	상세설명
Allegro MicroSystems	ACS770XCB	1Mb/29P	4.1 關s output rise time in response to step input current
	A8739	569Kb/21P	The Allegro A8739 is a Xenon photoflash charger IC designed to provide an ultra-small solution with flexibility to adjust both charging current limit and output voltage target.
	A4952	292Kb/11P	Designed for pulse width modulated (PWM) control of DC motors, the A4952 and A4953 are capable of peak output currents to 짹2 A and operating voltages to 40 V.
	ATS616LSG	486Kb/14P	The ATS616 gear-tooth sensor IC is a peak-detecting device that uses automatic gain control and an integrated capacitor to provide extremely accurate gear edge detection down to..
	A8670	463Kb/27P	The A8670 is a synchronous buck converter capable of delivering up to 2 A.
	UCQ5818	166Kb/8P	BiMOS II 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS FOR -40 C TO +85 C OPERATION
	A3998	341Kb/20P	Designed to provide the motor driver and power supply requirements for printers and office automation equipment.
	A4480	706Kb/11P	Wide Input 5 V, 50 mA, Automotive Regulator with Output Short-to-Battery Protection and Power OK
	UCQ5812AF	123Kb/8P	BiMOS II 20-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS FOR -40 Degrees Celcious TO +85 Degrees Celcious OPERATION
	A6213	641Kb/17P	The A6213 is a single IC switching regulator that provides constant-current output to drive high-power LEDs.
	ATS657	416Kb/15P	The ATS657 includes an optimized Hall-effect sensing integrated circuit (IC) and rare earth pellet to create a user..
	A4941	226Kb/9P	The A4941 three-phase motor driver incorporates BEMF sensing to eliminate the requirement for Hall sensors in fan applications.
	A3988	333Kb/14P	The A3988 is a quad DMOS full-bridge driver capable of driving up to two stepper motors or four DC motors.
	A4491	399Kb/16P	Designed to provide the power supply requirements of printers, office automation, industrial, and portable equipment, the A4491 provides three high current,
	A4490	397Kb/17P	Designed to provide the power supply requirements of printers, office automation, industrial, and portable equipment, the A4490 provides three high current,
	A6265	349Kb/17P	The A6265 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series.
	A6268	369Kb/19P	The A6268 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series.
	A6267	349Kb/17P	The A6267 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series.
	A1225	286Kb/13P	These Hall-effect latches are extremely temperature-stable and stress resistant sensor ICs especially suited for operation over extended temperature ranges to 150째C.
	A4401	417Kb/17P	This device provides all the necessary control functions to provide the power rails for driving a vacuum fluorescent display (VFD) using minimal external components.

3.5MM FEMALE TO 2.4MM 데이터시트, PDF

링크 URL :