GENERAL DESCRIPTION
The ISD5100 ChipCorder Series provide high quality, fully integrated, single-chip Record/Playback solutions for 1- to 16-minute messaging applications that are ideal for use in cellular phones, automotive communications, GPS/navigation systems and other portable products. The ISD5100 Series products are an enhancement of the ISD5000 architecture, providing: 1) the I2C serial port - address, control and duration selection are accomplished through an I2C interface to minimize pin count (ONLY two control lines required); 2) the capability of storing digital data, in addition to analog data. This feature allows customers to store phone numbers, system configuration parameters and message address locations for message management capability; 3) Various internal circuit blocks can be individually powered-up or -down for power saving.

FEATURES
Fully-Integrated Solution
• Single-chip voice record/playback solution
• Dual storage of digital and analog data
• Durations
   ► 8 to 16-minute (ISD5116)
   ► 4 to 8-minute (ISD5108)
   ► 2 to 4-minute (ISD5104)
   ► 1 to 2-minute (ISD5102)

Low Power Consumption
• +2.7 to +3.3V (VCC) Supply Voltage
• Supports 2.0V and 3.0V interface logic
• Operating Current:
   ► ICC Play = 15 mA (typical)
   ►ICC Rec = 30 mA (typical)
   ►ICC Feedthrough = 12 mA (typical)
• Standby Current:
   ► ISB = 1µA (typical)
• Most stages can be individually powered down to minimize power consumption

Enhanced Voice Features
• One or two-way conversation record
• One or two-way message playback
• Voice memo record and playback
• Private call screening
• In-terminal answering machine
• Personalized outgoing message
• Private call announce while on call

Digital Memory Features
• Up to 4 Mb available (ISD5116)
• Up to 2 Mb available (ISD5108)
• Up to 1 Mb available (ISD5104)
• Up to 512Kb available (ISD5102)
• Storage of phone numbers, system configuration parameters and message address table in cellular application

Easy-to-use and Control
• No compression algorithm development required
• User-controllable sampling rates
• Programmable analog interface
• Standard & Fast mode I2C serial interface (100kHz – 400 kHz)
• Fully addressable for multiple messages

High Quality Solution
• High quality voice and music reproduction
• Winbond’s standard 100-year message retention (typical)
• 100K record cycles (typical) for analog data
• 10K record cycles (typical) for digital data

Options
• Available in die form, TSOP and SOIC and PDIP (ISD5116 Only)
• Temperature: Commercial – Packaged (0 to +70°C) & die (0 to +50°C); Industrial (-40 to +85°C)