DATA SHEET

HVC 4x Family

TDK-Micronas GmbH

July 9, 2021; DSH000216_001EN

9

Communication

– LIN telegram supporting UART with automatic baud rate adjustment and receive/

transmit FIFOs, usable for LIN slave operation.

– Synchronous Serial Peripheral Interface (SPI), master mode only.

– Special PWM module (PWMIO), e.g. for customer specific bus communication. The

module can be accessed either via LGPIO alternative functions or the LIN pin. If LGPIO

ports shall be used the ESD-protection and open-drain architecture must be applied by

external components.

Timers and Counters

– One Capture Compare (CAPCOM) unit with three channels and one 16-bit free-run-

ning counter.

– Two 16-bit timer modules: usable as timer, counter, input capture, or PWM output.

Miscellaneous

• Nominal: 8 V to 18 V

• With degraded analog parameters from 5.4 V to 8 V. From 18 V to 40 V with limited

BVDD current according to thermal power budget boundaries.

• Support of jump-start and load-dump requirements.

– 5 V LDO pre-regulator with support of start-stop applications.

– RAM data retention to support crank-pulse / start-stop applications.

– Automotive AEC-Q100 Grade 1 qualified

– Extended junction temperature range:

40 °C to 160 °C