ST25DV64K datasheet(156/200 Pages) STMICROELECTRONICS

156 / 200 page

Ordering information

Table 261. Ordering information scheme

Example:

ST25DV

64K

-JF

Device type

ST25DV = Dynamic NFC/RFID tag based

on ISO 15693 and NFC T5T

Memory size

04K = 4 Kbits

16K = 16 Kbits

64K = 64 Kbits

Device Features

IE = I2C & GPO open drain, fast transfer mode & Energy Harvesting

JF = I2C & GPO CMOS, fast transfer mode, energy harvesting & low

power mode

Operating voltage

R = VCC = 1.8 to 5.5 V

Device grade

6 = industrial: device tested with standard test flow over - 40 to 85 °C

8 = industrial device tested with standard test flow over -40 to 105 °C (UFDFPN8 and UFDFPN12

only) or over -40 to 125 °C (SO8N and TSSOP8 only, 105 °C only for RF interface)

Package

D = UFDFPN12

S = SO8N

T = TSSOP8

C = UFDFPN8 (Only for 04K version)

U = 725 µm +/- 20 µm unsawn wafer (Only for 04K version)

L = WLCSP (thin 10 balls) (Only for 04K version)

Capacitance

3 = 28.5 pF

Note:

Parts marked as “ES” or “E” are not yet qualified and therefore not approved for use in production. ST is

not responsible for any consequences resulting from such use. In no event will ST be liable for the customer

using any of these engineering samples in production. ST’s Quality department must be contacted prior to any

decision to use these engineering samples to run a qualification activity.

ST25DV04K ST25DV16K ST25DV64K

Ordering information

DS10925 - Rev 9

page 156/200

ST25DV64K 데이터시트(PDF) 156 Page - STMicroelectronics