QB-R5F100SL-TB datasheet(119/207 Pages) RENESAS

119 / 207 page

RL78/G13

3. ELECTRICAL SPECIFICATIONS (G: INDUSTRIAL APPLICATIONS TA = –40 to +105°C)

R01DS0131EJ0350 Rev.3.50

119 of 200

Jun 30, 2020

3. ELECTRICAL SPECIFICATIONS

(G: INDUSTRIAL APPLICATIONS TA = –40 to +105°C)

This chapter describes the following electrical specifications.

Target products G:

Industrial applications TA = –40 to +105°C

R5F100xxGxx

Cautions 1.

The RL78 microcontrollers have an on-chip debug function, which is provided for development

and evaluation. Do not use the on-chip debug function in products designated for mass

production, because the guaranteed number of rewritable times of the flash memory may be

exceeded when this function is used, and product reliability therefore cannot be guaranteed.

Renesas Electronics is not liable for problems occurring when the on-chip debug function is

used.

With products not provided with an EVDD0, EVDD1, EVSS0, or EVSS1 pin, replace EVDD0 and EVDD1

with VDD, or replace EVSS0 and EVSS1 with VSS.

The pins mounted depend on the product. Refer to 2.1 Port Function to 2.2.1 Functions for each

product in the RL78/G13 User’s Manual.

Please contact Renesas Electronics sales office for derating of operation under TA = +85°C to

+105°C. Derating is the systematic reduction of load for the sake of improved reliability.

Remark

When RL78/G13 is used in the range of TA = –40 to +85°C, see 2. ELECTRICAL SPECIFICATIONS (TA = –

40 to +85°C).

There are following differences between the products "G: Industrial applications (TA = –40 to +105°C)" and the products

“A: Consumer applications, and D: Industrial applications”.

Parameter

Application

A: Consumer applications,

D: Industrial applications

G: Industrial applications

Operating ambient temperature

TA = -40 to +85°C

TA = -40 to +105°C

Operating mode

Operating voltage range

HS (high-speed main) mode:

2.7 V

≤ VDD ≤ 5.5 V@1 MHz to 32 MHz

2.4 V

≤ VDD ≤ 5.5 V@1 MHz to 16 MHz

LS (low-speed main) mode:

1.8 V

≤ VDD ≤ 5.5 V@1 MHz to 8 MHz

LV (low-voltage main) mode:

1.6 V

≤ VDD ≤ 5.5 V@1 MHz to 4 MHz

HS (high-speed main) mode only:

2.7 V

≤ VDD ≤ 5.5 V@1 MHz to 32 MHz

2.4 V

≤ VDD ≤ 5.5 V@1 MHz to 16 MHz

High-speed on-chip oscillator clock

accuracy

1.8 V

≤ VDD ≤ 5.5 V

±1.0%@ TA = -20 to +85°C

±1.5%@ TA = -40 to -20°C

1.6 V

≤ VDD < 1.8 V

±5.0%@ TA = -20 to +85°C

±5.5%@ TA = -40 to -20°C

2.4 V

≤ VDD ≤ 5.5 V

±2.0%@ TA = +85 to +105°C

±1.0%@ TA = -20 to +85°C

±1.5%@ TA = -40 to -20°C

Serial array unit

UART

CSI: fCLK/2 (supporting 16 Mbps), fCLK/4

Simplified I2C communication

UART

CSI: fCLK/4

Simplified I2C communication

IICA

Normal mode

Fast mode

Fast mode plus

Normal mode

Fast mode

Voltage detector

Rise detection voltage: 1.67 V to 4.06 V

(14 levels)

Fall detection voltage: 1.63 V to 3.98 V

(14 levels)

Rise detection voltage: 2.61 V to 4.06 V

(8 levels)

Fall detection voltage: 2.55 V to 3.98 V

(8 levels)

(Remark is listed on the next page.)

QB-R5F100SL-TB 데이터시트(PDF) 119 Page - Renesas Technology Corp

QB-R5F100SL-TB 데이터시트(HTML) 119 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL