STM32H7 datasheet(273/357 Pages) STMICROELECTRONICS

273 / 357 page

DS12110 Rev 10

273/357

STM32H742xI/G STM32H743xI/G

Electrical characteristics (rev V)

320

7.3.18

Quad-SPI interface characteristics

Unless otherwise specified, the parameters given in Table 181 and Table 182 for QUADSPI

are derived from tests performed under the ambient temperature, fAHB frequency and VDD

supply voltage conditions summarized in Table 122: General operating conditions, with the

following configuration:

•

Output speed is set to OSPEEDRy[1:0] = 11

•

Measurement points are done at CMOS levels: 0.5VDD

•

IO Compensation cell activated.

•

HSLV activated when VDD ≤ 2.7 V

•

VOS level set to VOS1

Refer to Section 7.3.15: I/O port characteristics for more details on the input/output alternate

function characteristics.

The following table summarizes the parameters measured in SDR mode.

Table 180. LPSDR SDRAM Write timings(1)

1. Guaranteed by characterization results.

Symbol

Parameter

Min

Max

Unit

tw(SDCLK)

FMC_SDCLK period

2Tfmc_ker_ck – 1 2Tfmc_ker_ck+0.5

td(SDCLKL _Data)

Data output valid time

2.5

th(SDCLKL _Data)

Data output hold time

td(SDCLKL_Add)

Address valid time

2.5

td(SDCLKL-SDNWE)

SDNWE valid time

2.5

th(SDCLKL-SDNWE)

SDNWE hold time

td(SDCLKL- SDNE)

Chip select valid time

th(SDCLKL- SDNE)

Chip select hold time

td(SDCLKL-SDNRAS)

SDNRAS valid time

1.5

th(SDCLKL-SDNRAS)

SDNRAS hold time

td(SDCLKL-SDNCAS)

SDNCAS valid time

1.5

td(SDCLKL-SDNCAS)

SDNCAS hold time

STM32H7 데이터시트(PDF) 273 Page - STMicroelectronics

STM32H7 데이터시트(HTML) 273 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL