 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
DSPIC30F6015T-30E/PT 데이터시트(PDF) 3 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
DSPIC30F6015T-30E/PT 데이터시트(HTML) 3 Page - Microchip Technology |
|
|
3 / 236 page  © 2007 Microchip Technology Inc. DS70150C-page 1 dsPIC30F6010A/6015 High-Performance Modified RISC CPU: • Modified Harvard architecture • C compiler optimized instruction set architecture with flexible Addressing modes • 83 base instructions • 24-bit wide instructions, 16-bit wide data path • 144 Kbytes on-chip Flash program space (Instruction words) • 8 Kbytes of on-chip data RAM • 4 Kbytes of nonvolatile data EEPROM • Up to 30 MIPS operation: - DC to 40 MHz external clock input - 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x) - 7.37 MHz internal RC with PLL active (4x, 8x, 16x) • 44 interrupt sources: - 5 external interrupt sources - 8 user selectable priority levels for each interrupt source - 4 processor trap sources • 16 x 16-bit working register array DSP Engine Features: • Dual data fetch • Accumulator write-back for DSP operations • Modulo and Bit-Reversed Addressing modes • Two, 40-bit wide accumulators with optional saturation logic • 17-bit x 17-bit single-cycle hardware fractional/ integer multiplier • All DSP instructions single cycle • ±16-bit single-cycle shift Peripheral Features: • High-current sink/source I/O pins: 25 mA/25 mA •Timer module with programmable prescaler: - Five 16-bit timers/counters; optionally pair 16-bit timers into 32-bit timer modules • 16-bit Capture input functions • 16-bit Compare/PWM output functions •3-wire SPI modules (supports 4 Frame modes) •I2CTM module supports Multi-Master/Slave mode and 7-bit/10-bit addressing • 2 UART modules with FIFO Buffers • 2 CAN modules, 2.0B compliant (dsPIC306010A) • 1 CAN module, 2.0B compliant (dsPIC306015) Motor Control PWM Module Features: • 8 PWM output channels: - Complementary or Independent Output modes - Edge and Center-Aligned modes • 4 duty cycle generators • Dedicated time base • Programmable output polarity • Dead-Time control for Complementary mode • Manual output control • Trigger for A/D conversions Quadrature Encoder Interface Module Features: • Phase A, Phase B and Index Pulse input • 16-bit up/down position counter • Count direction status • Position Measurement (x2 and x4) mode • Programmable digital noise filters on inputs • Alternate 16-bit Timer/Counter mode • Interrupt on position counter rollover/underflow Note: This data sheet summarizes features of this group of dsPIC30F devices and is not intended to be a complete reference source. For more information on the CPU, peripherals, register descriptions and general device functionality, refer to the “dsPIC30F Family Reference Manual” (DS70046). For more information on the device instruction set and pro- gramming, refer to the “dsPIC30F/33F Programmers Reference Manual” (DS70157). dsPIC30F6010A/6015 Enhanced Flash 16-bit Digital Signal Controller (DSC) |
유사한 부품 번호 - DSPIC30F6015T-30E/PT |
|
유사한 설명 - DSPIC30F6015T-30E/PT |
|
|
링크 URL |
| 개인정보취급방침 |
| ALLDATASHEET.CO.KR |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
