ST72E331 datasheet(102/107 Pages) STMICROELECTRONICS

부품명	ST72E331

상세설명	8-BIT MCU WITH 8 TO 16K OTP/EPROM, 256 EEPROM, 384 TO 512 BYTES RAM, ADC, WDG, SCI, SPI AND 2 TIMERS

PDF	107 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

102 / 107 page

102/107

ST72E331 ST72T331

8 GENERAL INFORMATION

8.1 EPROM ERASURE

EPROM version devices are erased by exposure

to high intensity UV light admitted through the

transparent window. This exposure discharges the

floating gate to its initial state through induced

photo current.

It is recommended that the EPROM devices be

kept out of direct sunlight, since the UV content of

sunlight can be sufficient to cause functional fail-

ure. Extended exposure to room level fluorescent

lighting may also cause erasure.

An opaque coating (paint, tape, label, etc...)

should be placed over the package window if the

product is to be operated under these lighting con-

ditions. Covering the window also reduces IDD in

power-saving modes due to photo-diode leakage

currents.

An Ultraviolet source of wave length 2537 Å yield-

ing a total integrated dosage of 15 Watt-sec/cm2 is

required to erase the device. It will be erased in 15

to 20 minutes if such a UV lamp with a 12mW/cm2

power rating is placed 1 inch from the device win-

dow without any interposed filters.

ST72E331 데이터시트(PDF) 102 Page - STMicroelectronics