| 전자부품 데이터시트 검색엔진 |
|
38K2 데이터시트(PDF) 106 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
38K2 데이터시트(HTML) 106 Page - Renesas Technology Corp |
|
106 / 358 page ![]() FUNCTIONAL DESCRIPTION Rev.2.00 Oct 15, 2006 page 87 of 130 38K2 Group REJ09B0338-0200 HARDWARE Fig. 127 Memory channel tranmitting operation (1) (6) Memory Channel Transmitting Operation (1)- Cycle Mode Memory channel transmitting operation (1) is shown bellow. #0 #1 Mch_req Mch_req #0 #1 012 34 5 req req 010016 010116 010216 ack ack DMA acknowledge ExDACK mRD detection mRD detection DMA request ExDREQ ➀ ➀ ➁ ➁ ➂’ ➂➃ ➂➃ ➄ ➄ ➅ ➂’ ➅ Address ExA0 Chip select ExCS Read ExRD Write ExWR Data DQ0 to DQ7 Internal clock φ Transmit buffer TXBUF Operation enabled Transmission completed Main sequencer Internal memory access Acknowledgment of internal memory access Memory address Counter end Memory channel operation end interrupt Dack = “0” A0 = “x” CS = “1” Dack = “0” A0 = “x” CS = “1” <Initial setting> External I/O configuration register Set as necessary. Memory channel operation mode register MC_DIR[1:0] (Memory channel direction control) = 102 (Transmit mode) Burst (burst) = “0” (Cycle mode) Memory address counter (Example) 010016 End address register (Example) 010116 <Operation start command> EXB interrupt source enable register MC_ENB (Memory channel operation enable) = “1” (Operation start) ➀ In the memory channel transmit mode when the command for enabling operation is written, operation starts (main sequencer starts) and an internal memory access sequence which synchronized with a rise of φ is activated. ➁ A data is read out from the internal memory within two clocks at a minimum and this data is stored in the transmit buffer (TXBUF). The memory address counter is simultaneously increased and assertion of the memory channel request is made. ➂ When the external MCU bus is in the condition of ExCS = “L” and ExA0 = “L” or a fall of ExRD is detected in the condition of ExDACK = “L”, negation of the memory channel request which synchronized with a rise of φ is made. ➃ When a rise of ExRD is detected, an internal memory access sequence which synchronized with a rise of φ is activated. ➄ A data is read out from the internal memory within two clocks at a minimum and this data is stored in the transmit buffer (TXBUF). The memory address counter is simultaneously increased and assertion of the memory channel request is made. When the read operation from the end address has been completed, the transition to the status to wait the memory channel operation end occurs. ➅ When a rise of ExRD is detected, the memory channel operation sequence ends and the memory channel operation end interrupt is generated. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |