 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
M38042F7HKP 데이터시트(PDF) 143 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M38042F7HKP 데이터시트(HTML) 143 Page - Renesas Technology Corp |
|
|
143 / 387 page  2-19 APPLICATION 2.2 Interrupt Rev.1.00 Jan 14, 2005 REJ09B0212-0100Z 3804 Group (Spec.H) 2.2.6 INT interrupt The INT interrupt requests is generated when the microcomputer detects a level change of each INT pin (INT0–INT4). (1) Active edge selection INT0–INT4 can be selected from either a falling edge or rising edge detection as an active edge by the interrupt edge selection register. In the “0” state, the falling edge of the corresponding pin is detected. In the “1” state, the rising edge of the corresponding pin is detected. (2) INT0, INT2, INT4 interrupt source selection When using the following interrupt source, select which of the interrupt source by the interrupt source selection register (address 003916). (Set these bits to “0” when using INT.) •INT0 or timer Z (bit 0) •INT4 or CNTR2 (bit 4) •INT2 or I2C (bit 5) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
