| 전자부품 데이터시트 검색엔진 |
|
MAC7200 데이터시트(PDF) 306 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MAC7200 데이터시트(HTML) 306 Page - Freescale Semiconductor, Inc |
|
306 / 976 page ![]() The SPP DMA Controller Module (SPP_DMA2) MAC7200 Microcontroller Family Reference Manual, Rev. 2 228 Freescale Semiconductor Figure 12-22 and Table 12-26 define word 5 of the TCDn structure, the citer and doff fields. Table 12-25. TCDn Word 4 (TCDn.daddr) Field Descriptions Field Description 31–0 daddr[31:0] Destination address. Memory address pointing to the destination data. Register address: DMA_Offset + 0x1000 + (32 x n) + 0x14 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 Rciter. e_link citer[14:9] or citer.linkch[5:0] citer[8:0] W Reset — ——————————————— 15 14 13 12 11 10 9876543210 R doff[15:0] W Reset — ——————————————— = Unimplemented Figure 12-22. TCDn Word 5 (TCDn.{citer,doff}) Fields Table 12-26. TCDn Word 5 (TCDn.{doff,citer}) Field Descriptions Field Description 31 citer.e_link Enable channel-to-channel linking on minor loop complete. As the channel completes the inner minor loop, this flag enables the linking to another channel, defined by citer.linkch[5:0]. The link target channel initiates a channel service request via an internal mechanism that sets the TCD.start bit of the specified channel. If channel linking is disabled, the citer value is extended to 15 bits in place of a link channel number. If the "major" loop is exhausted, this link mechanism is suppressed in favor of the major.e_link channel linking. This bit must be equal to the biter.e_link bit otherwise a configuration error will be reported. 0 The channel-to-channel linking is disabled. 1 The channel-to-channel linking is enabled. 30–25 citer[14:9] or citer.linkch [5:0] Current “major” iteration count or Link channel number. If (TCD.citer.e_link = 0) then No channel-to-channel linking (or chaining) is performed after the inner "minor" loop is exhausted. TCD word 5, bits [30:25] are used to form a 15 bit citer field. else After the "minor" loop is exhausted, the dma_engine initiates a channel service request at the channel defined by citer.linkch[5:0] by setting that channel’s TCD.start bit. The value contained in citer.linkch[5:0] must not exceed the number of implemented channels. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |