| 전자부품 데이터시트 검색엔진 |
|
LM8M64 데이터시트(PDF) 7 Page - Sharp Corporation |
|
|
|||||||||||||||||||||||||||||
LM8M64 데이터시트(HTML) 7 Page - Sharp Corporation |
|
7 / 1 page ![]() SPEC No. LC9 LC9 LC9 LC98109A 8109A 8109A 8109A MODEL No. LM LM LM LM8M64 8M64 8M64 8M64 PAGE 3333 13) Procedure insert mating connector When the mating connector is inserted, it should be parallel to the used connector of LCD module and it should be inserted horizontally. When the mating connector is attempted to be fixed to LCD connector, it should be inserted properly in order not to create a gap as shown “A”. Please insert the connector as both edge is placed to the connect position of LCD connector. LCD Connector Parallel LCD Connector A LCD Connector 14) This specification describes display quality in case of no gray scale. Since display quality can be affected by gray scale methods, display quality shall be carefully evaluated for the usability of LCD module in case gray scale is displayed on the LCD module. 15) The module should be driven according to the specified ratings to avoid permanent damage. DC voltage drive leads to rapid deterioration of LC, so ensure that the drive is alternating waveform by continuous application of the signal M. Especially the power ON/OFF sequence shown on Page 24 should be kept to avoid latch-up of drive LSIs and application of DC voltage to LCD panel. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |