CUSTOMER DRAWING

TITLE:

SOLDERSLEEVE SHIELD

TERMINATOR

Unless otherwise specified dimensions are in

millimeters.[Inches dimensions are shown in brackets]

Raychem

Devices

DOCUMENT NO.:

D-101-31

TOLERANCES:

0.00 N/A

0.0 N/A

0 N/A

ANGLES: N/A

ROUGHNESS

IN MICRON

Tyco Electronics Corporation reserves

the right to amend this drawing at any

time. Users should evaluate the

suitability of the product for their

application.

REV:

C

DATE:

June 9, 2011

PREPARED BY:

YNGUYEN

CAGE CODE:

06090

ECO NUMBER:

ECO-11-011935

SCALE:

NTS

SIZE:

A

SHEET:

1 of 1

© 2009-2011 Tyco Electronics Corporation. All rights reserved.

If this document is printed it becomes uncontrolled. Check for the latest revision.

Product Dimensions

Cable Dimensions

Product

Name

L

max

øA

min

øB

min

øD

max

øE

min

øG

max

J

0.5

(J

0.02)

D-101-31

17.25

(0.680)

4.55

(0.180)

5.00

(0.200)

5.00

(0.200)

2.5

(0.100)

4.55

(0.180)

7

(0.275)

MATERIALS

1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.

2. SOLDER PREFORM WITH FLUX:

SOLDER:

TYPE Sn63 per ANSI-J-STD-006.

FLUX:

TYPE ROM1 per ANSI-J-STD-004.

3. MELTABLE RING: Thermally stabilized thermoplastic. Color: gray.

4. MELTABLE RING: Thermally stabilized thermoplastic. Color: blue.

APPLICATION

1. This part is designed to provide an environment protected shield termination on cables, rated for 125

C minimum, meeting the

dimensional criteria listed, having nickel plated copper shields.

2. Install using TE approved convection or infrared tools in accordance with TE assembly procedure RCPS-100-70.

3. Assemblies will meet requirements of TE specification RT-1404 and National Aerospace Standard NAS-1747.

4. Temperature range: -55

C to +150C.

For best results, prepare the cable as shown: