STM32F407IG datasheet(120/167 Pages) STMICROELECTRONICS

120 / 167 page

Electrical characteristics

STM32F405xx, STM32F407xx

120/167

Doc ID 022152 Rev 2

Equation 1: RAIN max formula

The formula above (Equation 1) is used to determine the maximum external impedance

allowed for an error below 1/4 of LSB. N = 12 (from 12-bit resolution) and k is the number of

sampling periods defined in the ADC_SMPR1 register.

Note:

ADC accuracy vs. negative injection current: Injecting a negative current on any of the

standard (non-robust) analog input pins should be avoided as this significantly reduces the

accuracy of the conversion being performed on another analog input. It is recommended to

add a Schottky diode (pin to ground) to standard analog pins which may potentially inject

negative currents.

Any positive injection current within the limits specified for IINJ(PIN) and ΣIINJ(PIN) in

Section 5.3.16 does not affect the ADC accuracy.

Table 66.

ADC accuracy at fADC = 30 MHz

(1)

Better performance could be achieved in restricted VDD, frequency and temperature ranges.

Symbol

Parameter

Test conditions

Typ

Max(2)

Based on characterization, not tested in production.

Unit

Total unadjusted error

fPCLK2 = 60 MHz,

fADC = 30 MHz, RAIN < 10 kΩ,

VDDA = 1.8

(3) to 3.6 V

If an inverted reset signal is applied to PDR_ON, this value can be lowered to 1.7 V when the device

operates in a reduced temperature range (0 to 70 °C).

±2

±5

LSB

Offset error

±1.5

±2.5

Gain error

±1.5

±3

Differential linearity error

±1

±2

Integral linearity error

±1.5

±3

AIN

k0.5

–

()

ADC

()

--------------------------------------------------------------

ADC

–

STM32F407IG 데이터시트(PDF) 120 Page - STMicroelectronics

STM32F407IG 데이터시트(HTML) 120 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL