| 전자부품 데이터시트 검색엔진 |
|
HT85F2270 데이터시트(PDF) 116 Page - Holtek Semiconductor Inc |
|
|
|||||||||||||||||||||||||||||
HT85F2270 데이터시트(HTML) 116 Page - Holtek Semiconductor Inc |
|
116 / 226 page ![]() Rev. 1.00 116 of ��6 �a� 1�� �01� Standard 8051 8-Bit Flash MCU HT85F2260/HT85F2270/HT85F2280 SPI Interface Interrupt A SPI Interrupt request will take place when one of the SPI Interrupt request flags, SPIF, WCOL, SSERR or MODF, is set, which occurs when a byte of data has been received or when there is a write collision or when there is a Serial Slave error or transmitted by the SPI interface or the Master mode or Slave mode is mismatched with the mode selected input pin level. To allow the program to branch to its respective interrupt vector address, the global interrupt enable bit, EAL, and the Serial Interface Interrupt enable bit, ESPI, must first be set. When the interrupt is enabled, the stack is not full and a byte of data has been transmitted or received by the SPI interface, or the Mode mismatch, a subroutine call to the respective Interrupt vector, will take place. When the SPI Interface Interrupt is serviced, the EAL bit must be cleared by the application program to disable other interrupts, and the SPIF, WCOL, SSERR and MODF flags also must be cleared using the application program. UART Interface Interrupt A UARTn Interrupt request will take place when the UARTn Interrupt request flags, RIn or TIn, is set, which occurs when a byte of data has been received or transmitted by the UARTn interface. To allow the program to branch to its respective interrupt vector address, the global interrupt enable bit, EAL, and the UART Interrupt enable bit, ESn, must first be set. When the interrupt is enabled, the stack is not full and a byte of data has been transmitted or received by the UARTn interface, will take place. When the UARTn Interface Interrupt is serviced, the EAL bit must be cleared by the application program to disable other interrupts, and the RIn or TIn flag also must be cleared using the application program. LVD Interrupt A LVD Interrupt request will take place when the LVD Interrupt request flag, LVDF, is set, which occurs when the Low Voltage Detector function detects a low power supply voltage. To allow the program to branch to its respective interrupt vector address, the global interrupt enable bit, EAL, Low Voltage Interrupt enable bit, ELVD, must first be set. When the interrupt is enabled, the stack is not full and a low voltage condition occurs, a subroutine call to the Interrupt vector, will take place. When the Low Voltage Interrupt is serviced, the EAL bit will be automatically cleared to disable other interrupts and the LVDF flag will be automatically cleared. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |