| 전자부품 데이터시트 검색엔진 |
|
PIC17C44-08/P 데이터시트(PDF) 106 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC17C44-08/P 데이터시트(HTML) 106 Page - Microchip Technology |
|
106 / 240 page ![]() PIC17C4X DS30412C-page 106 © 1996 Microchip Technology Inc. 14.4.2 MINIMIZING CURRENT CONSUMPTION To minimize current consumption, all I/O pins should be either at VDD, or VSS, with no external circuitry drawing current from the I/O pin. I/O pins that are hi-impedance inputs should be pulled high or low externally to avoid switching currents caused by floating inputs. The T0CKI input should be at VDD or VSS. The contributions from on-chip pull-ups on PORTB should also be con- sidered, and disabled when possible. 14.5 Code Protection The code in the program memory can be protected by selecting the microcontroller in code protected mode (PM2:PM0 = '000'). In this mode, instructions that are in the on-chip pro- gram memory space, can continue to read or write the program memory. An instruction that is executed out- side of the internal program memory range will be inhib- ited from writing to or reading from program memory. If the code protection bit(s) have not been pro- grammed, the on-chip program memory can be read out for verification purposes. Note: PM2 does not exist on the PIC17C42. To select code protected microcontroller mode, PM1:PM0 = '00'. Note: Microchip does not recommend code pro- tecting windowed devices. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |