| 전자부품 데이터시트 검색엔진 |
|
ST72561J4-Auto 데이터시트(PDF) 217 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST72561J4-Auto 데이터시트(HTML) 217 Page - STMicroelectronics |
|
217 / 324 page ![]() ST72561-Auto beCAN controller (beCAN) Doc ID 12370 Rev 8 217/324 Figure 94. CAN network topology CAN 2.0B active core The beCAN module handles the transmission and the reception of CAN messages fully autonomously. Standard identifiers (11-bit) and extended identifiers (29-bit) are fully supported by hardware. Control, status and configuration registers The application uses these registers to: ● Configure CAN parameters, e.g.baud rate ● Request transmissions ● Handle receptions ● Manage interrupts ● Get diagnostic information Tx mailboxes Two transmit mailboxes are provided to the software for setting up messages. The Transmission Scheduler decides which mailbox has to be transmitted first. Acceptance filters The beCAN provides six scalable/configurable identifier filter banks for selecting the incoming messages the software needs and discarding the others. Receive FIFO The receive FIFO is used by the CAN controller to store the incoming messages. Three complete messages can be stored in the FIFO. The software always accesses the next available message at the same address. The FIFO is managed completely by hardware. CAN CAN High Low CAN CAN Rx Tx CAN Transceiver CAN Controller ST9 MCU CAN Bus Application |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |