ST72324BL datasheet(141/151 Pages) STMICROELECTRONICS

141 / 151 page

ST72F324L, ST72324BL

141/151

DEVICE CONFIGURATION AND ORDERING INFORMATION (Cont’d)

14.2 DEVICE ORDERING INFORMATION AND TRANSFER OF CUSTOMER CODE

ROM devices can be ordered in any combination

of memory size and temperature range with the

types given in Figure 87 and by completing the op-

tion list on the next page. Flash devices are avail-

able only in the types listed in Table 26.

ROM customer code is made up of the ROM con-

tents and the list of the selected options (if any).

The ROM contents are to be sent with the S19

hexadecimal file generated by the development

tool. All unused bytes must be set to FFh.

Refer to application note AN1635 for information

on the counter listing returned by ST after code

has been transferred.

The STMicroelectronics Sales Organization will be

pleased to provide detailed information on con-

tractual points.

Caution: The Readout Protection binary value is

inverted between ROM and FLASH products. The

option byte checksum will differ between ROM and

FLASH.

Figure 87. ROM Factory Coded Device Types

DEVICE PACKAGE VERSION

XXX

Code name (defined by STMicroelectronics)

1= Standard 0 to +70 °C

5= Standard -10 to +85 °C

6= Standard -40 to +85 °C

A= Automotive -40 to +85 °C

T= Plastic Thin Quad Flat Pack

B= Plastic Dual in Line

ST72324BLJ4, ST72324BLJ2

ST72324BLK4, ST72324BLK2

ST72324BL 데이터시트(PDF) 141 Page - STMicroelectronics