ATS-18B-207-C2-R0
AI

The **ATS-18B-207-C2-R0** is a high-performance **Heat Sink** manufactured by Advanced Thermal Solutions (ATS). It belongs to the "push-pin" series designed for cooling electronic components such as BGA (Ball Grid Array) chips, CPUs, and GPUs.
---
## 1. Technical Specifications
Below are the primary physical and thermal characteristics of the component:
| Feature | Specification |
| :--- | :--- |
| **Manufacturer** | Advanced Thermal Solutions (ATS) |
| **Material** | Aluminum (Blue Anodized) |
| **Dimensions** | 54.00mm x 54.00mm |
| **Height (Off Base)** | 25.00mm |
| **Attachment Method** | Push-Pin (Brass) |
| **Thermal Resistance** | 6.39°C/W @ (Natural Convection) |
| **Fin Style** | Straight Fin |
| **Thermal Interface** | T766 (Pre-applied Phase Change Material) |
---
## 2. Key Electronic & Mechanical Features
### A. Attachment System (Push-Pins)
The "R0" suffix often refers to the specific mounting hardware. This model utilizes **Brass Push-Pins** with compression springs. This system provides:
* **Constant Pressure:** Ensures the heat sink stays firmly in contact with the semiconductor, maximizing heat transfer.
* **Reliability:** Unlike adhesive tapes, push-pins are mechanically secure and vibration-resistant.
### B. Thermal Interface Material (TIM)
The unit comes with **T766** pre-applied to the base.
* This is a "Phase Change" material.
* When the electronic part reaches operating temperature, the material softens to fill microscopic air gaps between the chip and the aluminum, significantly lowering thermal resistance.
### C. Thermal Performance (Airflow)
The performance varies based on the airflow provided by the system fans:
| Airflow Velocity (LFM) | Thermal Resistance (°C/W) |
| :--- | :--- |
| 200 (1.0 m/s) | 1.86 |
| 400 (2.0 m/s) | 1.19 |
| 600 (3.0 m/s) | 0.94 |
---
## 3. Application Use-Cases
This specific heat sink is typically used for:
1. **Network Switches/Routers:** High-speed processing chips that generate significant heat.
2. **FPGA/ASIC Cooling:** Custom integrated circuits that require stable thermal environments.
3. **Industrial PCs:** Where mechanical mounting (push-pins) is preferred over adhesives for longevity.
- ⤷
What is the hole-to-hole mounting distance required for this heat sink on a PCB?
- ⤷ Can the T766 thermal interface material be replaced with standard thermal paste?
- ⤷ What is the difference between the C2 and C1 versions of this series?