ATS-55375D-C1-R0
AI

The **ATS-55375D-C1-R0** is a high-performance heat sink component manufactured by **Advanced Thermal Solutions (ATS)**. It is part of the **maxiFLOW™** series, specifically designed for cooling electronic components such as processors, FPGAs, and ASICs where space is limited but thermal demands are high.
---
### 1. Technical Specifications
The following table highlights the core physical and thermal properties of the component:
| Feature | Specification |
| :--- | :--- |
| **Manufacturer** | Advanced Thermal Solutions (ATS) |
| **Series** | maxiFLOW™ |
| **Material** | Aluminum (Black Anodized) |
| **Dimensions (L x W x H)** | 37.00mm x 37.00mm x 9.50mm |
| **Attachment Method** | superGRIP™ (Steady pressure clip) |
| **Thermal Resistance** | 3.50°C/W @ 200 LFM |
| **Shape** | Square, Slanted Fin Design |
---
### 2. Key Electronic Features
* **Thermal Management:** The primary electronic function is to dissipate heat from integrated circuits (ICs). By reducing the operating temperature, it prevents **thermal throttling** and extends the MTBF (Mean Time Between Failures) of the semiconductor.
* **maxiFLOW™ Design:** The slanted fin geometry increases the surface area and encourages turbulent airflow, which is significantly more efficient than standard straight-fin heat sinks.
* **superGRIP™ Attachment:** This is a crucial feature for PCB designers. It uses a high-tension plastic frame and a gold-colored spring clip.
* **No Holes Required:** It attaches directly to the component, meaning no holes need to be drilled into the PCB.
* **Uniform Pressure:** It applies constant pressure to the Thermal Interface Material (TIM), ensuring optimal heat transfer.
---
### 3. Application Use Cases
This specific part is typically found in high-density electronic environments:
1. **Telecommunications:** Cooling network switches and routers.
2. **Data Centers:** Low-profile cooling for blade servers.
3. **Embedded Systems:** High-performance computing modules where vertical clearance is restricted (only 9.5mm high).
---
### 4. Comparison to Standard Heat Sinks
```markdown
* Standard Extrusion: Often heavier with less surface area.
* ATS-55375D-C1-R0: Lightweight aluminum with a specialized fin profile that maximizes airflow even at low velocities.
```
- ⤷
What is the difference between the C1-R0 and other variations in the maxiFLOW series?
- ⤷ Does this heat sink come with pre-applied Thermal Interface Material (TIM)?
- ⤷ What are the mechanical clearance requirements for the superGRIP attachment?