전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

  • CTLC0603F-R10J

  • AI
    ## Technical Overview: CTLC0603F-R10J The **CTLC0603F-R10J** is a surface-mount (SMD) wire-wound chip inductor. It is commonly used in high-frequency circuits for signal filtering and impedance matching. --- ### 1. Part Number Breakdown Understanding the nomenclature helps identify the specific characteristics of the component: | Segment | Meaning | Detail | | :--- | :--- | :--- | | **CTLC** | Series | Wire-wound Chip Inductor Series | | **0603** | Case Size | 0.6 x 0.3 inches (1608 Metric) | | **F** | Lead-Free | RoHS Compliant / Lead-Free construction | | **R10** | Inductance | **0.10 µH** (100 nH) | | **J** | Tolerance | **±5%** | --- ### 2. Key Electrical Specifications Below are the typical electrical parameters for this specific 0.10 µH inductor: | Parameter | Value | Unit | | :--- | :--- | :--- | | **Inductance** | 0.10 (100) | µH (nH) | | **Tolerance** | ±5 | % | | **Quality Factor (Q) Min** | 25 - 30 | (at test frequency) | | **Self-Resonant Frequency (SRF)** | ~700 - 1000 | MHz | | **DC Resistance (DCR) Max** | 0.50 - 0.70 | Ω | | **Rated Current (I-dc)** | 300 - 450 | mA | --- ### 3. Physical Characteristics * **Construction:** Ceramic core with a precision wire winding. This design provides higher Q factors and better current handling compared to multilayer inductors. * **Termination:** Usually features gold or tin-plated terminals for reliable soldering. * **Dimensions:** * Length: 1.6 mm * Width: 0.8 mm * Height: 0.8 mm (approximate) --- ### 4. Common Applications Due to its high frequency of operation and precision, this part is found in: * **RF Modules:** Bluetooth, Wi-Fi, and cellular transceivers. * **Impedance Matching:** Tuning circuits to ensure maximum power transfer between stages. * **Filtering:** Low-pass or band-pass filters to remove high-frequency noise. * **Oscillators:** Serving as the inductive element in LC resonance tanks. --- ### 5. Design Considerations * **Self-Resonant Frequency (SRF):** Ensure the operating frequency of your circuit is well below the SRF. Near the SRF, the inductor behaves like a capacitor. * **Current Derating:** If operating in high-temperature environments, the maximum allowable current (I-dc) should be derated to prevent thermal damage. * **Magnetic Interference:** Because it is a wire-wound component, it may emit or be susceptible to electromagnetic interference (EMI) if placed too close to sensitive traces.
    ✨ Follow-up Questions
    • ⤷What is the difference between a ceramic core and a ferrite core inductor?
    • ⤷ How does the Q factor affect the performance of an RF filter?
    • ⤷ Can this inductor be used in power supply switching circuits?