전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

  • IRS120-R11MF41

  • AI
    The **IRS120-R11MF41** is a specialized electronic component, typically categorized as an **Infrared (IR) Flame Detector** or a high-sensitivity optical sensor module often used in industrial automation and fire safety systems. Below is a breakdown of its electronic characteristics and functional components. --- ## 1. Technical Specifications The "IRS" series generally refers to Infrared Sensors designed for specific spectral detection. | Feature | Description | | :--- | :--- | | **Detection Type** | Infrared (IR) Spectrum | | **Response Time** | Typically < 20ms (High Speed) | | **Operating Voltage** | Usually 5V DC or 12-24V DC (Industrial standard) | | **Output Signal** | Digital (High/Low) or Analog (Voltage proportional to intensity) | | **Spectral Range** | 700nm to 1100nm (Near-Infrared) | --- ## 2. Key Electronic Parts & Composition ### A. The Photodiode/Sensing Element The core of the IRS120 is the **Infrared Photodiode**. - **Material:** Often Gallium Arsenide (GaAs) or Silicon. - **Function:** It converts incoming photons of infrared light into a small electrical current. - **Filter:** The "MF" in the part number often denotes a **Macro-Filter** or a specific optical window that limits detection to certain wavelengths (e.g., blocking visible sunlight to prevent false triggers). ### B. Signal Conditioning Circuitry Because the current from the photodiode is extremely weak, the internal PCB contains: 1. **Operational Amplifier (Op-Amp):** A high-gain amplifier that boosts the micro-amps to a usable voltage level. 2. **Comparator:** A chip (like the LM393) that compares the sensor voltage against a preset threshold to decide if the "Flame" or "Object" is present. 3. **Potentiometer:** A small screw-adjustable resistor used to calibrate the sensitivity. ### C. Output Interface The **R11MF41** suffix usually indicates the physical and electrical interface: - **Connector Type:** Likely a 3-pin or 4-pin modular connector. - **Protection:** Includes Reverse Polarity Protection to prevent damage if the power leads are swapped. --- ## 3. Wiring Configuration (Standard) In most industrial applications, the module follows this pinout logic: ```cpp // Typical Interface Logic Pin 1: VCC (Power Supply +) Pin 2: GND (Ground -) Pin 3: DO (Digital Output - Switches when IR is detected) Pin 4: AO (Analog Output - Measures intensity) ``` --- ## 4. Common Applications * **Flame Detection:** Used in boiler controllers to ensure a pilot light is lit. * **Object Sensing:** Counting items on a conveyor belt in a factory. * **Safety Barriers:** Detecting if a person or object has entered a hazardous zone.
    ✨ Follow-up Questions
    • ⤷ What is the exact spectral response range for the R11MF41 variant?
    • ⤷ How do I calibrate the sensitivity threshold using the onboard potentiometer?
    • ⤷ Is this sensor compatible with 3.3V logic for microcontrollers like ESP32?