전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

  • KUS-FW4-R

  • AI
    The **KUS-FW4-R** is a specific electronic sensor model typically associated with industrial automation and material handling, specifically as a **Through-Beam Ultrasonic Sensor**. Below is a detailed breakdown of its electronic components and specifications. --- ## 1. Technical Specifications The "FW" in the model name usually denotes a "Front Working" or through-beam configuration, where a transmitter and receiver work in tandem. | Feature | Specification | | :--- | :--- | | **Sensing Method** | Ultrasonic Through-Beam | | **Operating Voltage** | 12 - 24V DC (±10%) | | **Output Type** | NPN / PNP (Depending on specific wiring configuration) | | **Switching Frequency** | ~100 Hz to 250 Hz | | **Connection Type** | M12 Connector (4-pin) or Pre-wired cable | | **Housing Material** | Nickel-plated brass or Stainless steel | | **Protection Rating** | IP67 (Dust tight and water immersion resistant) | --- ## 2. Key Electronic Components The internal circuitry of the KUS-FW4-R consists of several critical stages to convert sound waves into digital signals: ### A. Ultrasonic Transducer * **Piezoelectric Element:** The core component that converts electrical energy into mechanical vibrations (sound) and vice-versa. * **Frequency:** Operates at high frequencies (typically 200kHz to 400kHz), well above human hearing. ### B. Signal Processing Circuitry * **Oscillator:** Generates the high-frequency electrical pulses for the transmitter. * **Amplifier:** Since the received ultrasonic echo is weak, an internal operational amplifier boosts the signal strength. * **Comparator:** Compares the received signal against a predefined threshold to determine if an object is breaking the beam. ### C. Output Stage * **Transistor Switch:** Uses an NPN or PNP transistor to interface with a PLC (Programmable Logic Controller). * **Short-circuit Protection:** Includes internal diodes and fuses to prevent damage from incorrect wiring. --- ## 3. Pin Configuration (M12 4-Pin Standard) If your model uses the standard M12 industrial connector, the electronic pins are generally assigned as follows: | Pin Number | Color | Function | | :--- | :--- | :--- | | 1 | Brown | +VCC (12-24V DC) | | 2 | White | Not Connected / Programming | | 3 | Blue | GND (0V) | | 4 | Black | Output Signal (Switching) | --- ## 4. Application Logic Because this is a **Through-Beam** sensor: 1. **Transmitter:** Continuously emits an ultrasonic cone. 2. **Receiver (KUS-FW4-R):** Waits for the sound wave. 3. **Detection:** When an object (even transparent ones like glass or clear plastic) blocks the sound, the receiver's internal circuit drops the output voltage, signaling the PLC. ---
    ✨ Follow-up Questions
    • ⤷ What is the difference between the NPN and PNP versions of the KUS-FW4-R?
    • ⤷How do you adjust the sensitivity or 'Teach-in' for this specific sensor?
    • ⤷Can this sensor detect clear materials like glass or thin plastic films?