LR6-E-R
AI

The **LR6-E-R** is a specific model within the **Patlite LR6 Series** of signal towers (stack lights). This component is a modular LED unit designed for industrial automation signaling.
Below is an explanation of its electronic and physical specifications.
---
## 1. Technical Specifications
The LR6-E-R follows a modular design, meaning it is the "Red" LED module part of a larger stack light assembly.
| Feature | Specification |
| :--- | :--- |
| **Model Name** | LR6-E-R |
| **Series** | LR6 (60mm Diameter) |
| **Color** | Red (R) |
| **Light Source** | Ultra-bright Multi-color LED |
| **Rated Voltage** | 24V DC (Standard for LR6 series) |
| **Current Consumption** | 0.04A (Typical) |
| **Operating Temp.** | -20°C to +50°C |
| **Protection Rating** | IP65 (When assembled correctly) |
---
## 2. Key Electronic Components & Features
### A. LED Technology
The unit uses high-intensity LEDs arranged to provide 360-degree visibility. Unlike older bulb-based systems, the LR6-E-R uses a specialized lens design that enhances light diffusion and brightness while consuming significantly less power.
### B. Modular Connection (The "Twist and Lock" System)
The electronic interface at the base of the module consists of:
* **Concentric Circular Contacts:** These allow the module to receive 24V DC power regardless of its orientation when twisted into the base or another module.
* **Internal Bus:** The signal is passed through the module to units stacked above it, allowing for multi-tier signaling (e.g., Red/Amber/Green).
### C. Circuit Protection
The internal PCB (Printed Circuit Board) includes basic rectification and current-limiting resistors to ensure the LEDs operate at a constant brightness despite minor fluctuations in the 24V DC supply.
---
## 3. Physical & Mechanical Interface
* **Lens Material:** Polycarbonate (Shock and heat resistant).
* **Diameter:** 60mm.
* **Assembly:** It uses a mechanical bayonet-style locking system. When you twist the module, the internal metal pins align with the circular pads of the unit below to complete the electrical circuit.
---
## 4. Wiring and Usage
The LR6-E-R does not have its own wires. It relies on the **LR6 Base Unit** for power.
1. The PLC (Programmable Logic Controller) sends a 24V signal to the Red wire of the base unit.
2. The base unit transfers power up the stack to the LR6-E-R module.
3. The LED illuminates to indicate a specific machine state (usually "Emergency Stop" or "Fault").
- ⤷
What is the maximum number of LR6 modules that can be stacked on one base?
- ⤷ Is the LR6-E-R compatible with 100-240V AC power systems?
- ⤷ What are the differences between the LR6-E and the older LCE series?