AI

## Overview of the M24C01-RDS6TG
The **M24C01-RDS6TG** is a 1-Kbit serial I2C bus EEPROM (Electrically Erasable Programmable Memory) manufactured by STMicroelectronics. It is designed for low-power and low-voltage applications, commonly used to store configuration data, calibration parameters, or small amounts of user data.
---
### 1. Key Technical Specifications
| Parameter | Specification |
| :--- | :--- |
| **Memory Size** | 1 Kbit (128 bytes × 8 bits) |
| **Interface** | I2C (Serial 2-Wire) |
| **Operating Voltage** | 1.8V to 5.5V |
| **Clock Frequency** | 400 kHz (Fast Mode) |
| **Package Type** | TSSOP8 (Thin Shrink Small Outline Package) |
| **Operating Temperature** | -40°C to +85°C |
| **Write Cycles** | More than 4 million cycles |
| **Data Retention** | More than 200 years |
---
### 2. Pin Configuration (TSSOP8)
The device typically utilizes 8 pins, though not all are always used for data transfer:
* **E0, E1, E2:** Chip Enable inputs. These are used to set the hardware address of the device on the I2C bus, allowing multiple EEPROMs to be connected to the same lines.
* **SDA (Serial Data):** Bi-directional pin used to transfer addresses and data into and out of the device.
* **SCL (Serial Clock):** Input used to synchronize the data transfer.
* **WC (Write Control):** A hardware write-protection pin. If tied to $V_{CC}$, write operations are inhibited. If tied to $V_{SS}$ (Ground), write operations are enabled.
* **VCC / VSS:** Power supply and Ground.
---
### 3. Core Functional Features
#### Byte and Page Write
The device supports both **Byte Write** (writing 1 byte at a time) and **Page Write** (up to 8 bytes in a single write cycle). This improves efficiency when updating larger chunks of data.
#### Low Power Consumption
Designed for battery-operated devices, it features:
* **Active Read Current:** < 1 mA
* **Standby Current:** < 1 µA (at 1.8V)
#### Data Protection
The **WC (Write Control)** pin provides physical protection against accidental data overwrites, which is critical for storing firmware settings or security keys.
---
### 4. Part Number Breakdown: M24C01-RDS6TG
| Suffix | Meaning |
| :--- | :--- |
| **M24** | I2C Serial Access EEPROM |
| **C01** | 1 Kbit Capacity |
| **R** | Operating Voltage (1.8V to 5.5V) |
| **DS** | TSSOP8 Package (ECOPACK2 compliant) |
| **6** | Industrial Temperature Range (-40°C to +85°C) |
| **T** | Tape and Reel Packing |
| **G** | Lead-free / RoHS Compliant |
---
- ⤷
How do you wire the WC (Write Control) pin to allow software updates?
- ⤷ What is the maximum I2C bus speed supported by this specific model?
- ⤷ Can you provide a C code snippet for reading a byte from this EEPROM?