M5R75XLJ-R
AI

Based on the part number **M5R75XLJ-R**, this component is a high-performance **Clock Oscillator** (specifically an XO - Crystal Oscillator) manufactured by **MtronPTI**.
These parts are typically utilized in high-speed networking, telecommunications, and server applications where low jitter and high stability are critical.
---
## Technical Specifications & Features
The part number follows a specific nomenclature. Here is a breakdown of its electronic characteristics:
| Parameter | Specification | Description |
| :--- | :--- | :--- |
| **Type** | PECL Oscillator | Positive Emitter-Coupled Logic (Differential) |
| **Output Type** | LVPECL | Low Voltage PECL for high-speed data transfer |
| **Frequency Stability** | ±50 ppm or ±25 ppm | Varies by specific dash code, but generally high precision |
| **Supply Voltage** | 3.3V (Typical) | Standard voltage for modern digital logic circuits |
| **Package Size** | 5.0 x 7.0 mm | SMT (Surface Mount Technology) J-lead or Ceramic package |
| **Operating Temp** | -40°C to +85°C | Industrial temperature range |
| **Jitter Performance** | Ultra-Low | Designed for minimal timing deviations (Femtosecond range) |
---
## Part Number Breakdown (M5R75XLJ-R)
1. **M5R**: Refers to the series (5x7mm surface mount, 3.3V, LVPECL).
2. **75**: Represents the Frequency Stability (typically ±50ppm).
3. **X**: Temperature Range (Standard Industrial -40°C to +85°C).
4. **L**: Duty Cycle / Symmetry (Usually 45/55%).
5. **J**: Packaging type (Tape & Reel or specific Lead configuration).
6. **-R**: RoHS Compliant (Lead-free).
---
## Key Applications
Because the **M5R75XLJ-R** provides a differential LVPECL output, it is highly resistant to electromagnetic interference (EMI) and is used in:
* **Gigabit Ethernet:** Timing for network switches and routers.
* **Fibre Channel:** Storage area networking.
* **SONET/SDH:** Optical transmission equipment.
* **FPGA Clocking:** Providing stable reference clocks for high-end Xilinx or Intel FPGAs.
---
## PCB Layout Considerations
When integrating this part into a circuit, keep the following in mind:
```markdown
1. Bypass Capacitors: Place a 0.01µF to 0.1µF ceramic capacitor as close to the VDD pin as possible.
2. Termination: LVPECL requires specific termination (usually 50 ohms to Vcc-2V) to ensure signal integrity.
3. Trace Routing: Keep differential output traces (OUT and OUT-complement) symmetrical and of equal length.
```
- ⤷
What is the exact output frequency for the M5R75XLJ-R variant?
- ⤷ How does LVPECL termination differ from LVDS in this oscillator?
- ⤷ Are there pin-compatible alternatives from other manufacturers like Epson or SiTime?