W2TS-1BY-R/CE
AI

The **W2TS-1BY-R/CE** is a specialized electronic component, specifically a **Thumbwheel Switch** (or Digital Switch) manufactured by **Omron**. These switches are used to convert physical manual input (turning a dial) into a digital electrical signal (BCD code).
Below is a detailed breakdown of its electronic specifications and features.
---
## 1. General Specifications
The part number follows Omron's technical nomenclature for the W2TS series.
| Feature | Specification |
| :--- | :--- |
| **Component Type** | Thumbwheel / Digital Switch |
| **Output Code** | BCD (Binary Coded Decimal) |
| **Color** | Black Case / Yellow-Red Characters |
| **Mounting Type** | Snap-in (Front Mounting) |
| **Number of Positions** | 10 (0 to 9) |
| **Electrical Rating** | 28 VDC, 0.1 A |
---
## 2. Electronic Operating Principles
### BCD Output Logic
The "1BY" designation typically refers to the **BCD (Binary Coded Decimal)** output. When the user rotates the thumbwheel to a specific number, internal copper wipers bridge specific pins on the PCB.
* **Logic:** For a given number (e.g., "3"), the switch connects the Common (C) pin to pins 1 and 2 ($2^0 + 2^1 = 3$).
* **Voltage:** It is designed for low-voltage signal circuits, not for switching high-power loads directly.
### Contact Resistance and Insulation
* **Contact Resistance:** Typically less than $200 \, m\Omega$ to ensure signal integrity.
* **Insulation Resistance:** $100 \, M\Omega$ minimum at 500 VDC.
* **Dielectric Strength:** Can withstand 600 VAC for 1 minute between terminals of the same polarity.
---
## 3. Physical & Mechanical Parts
### External Housing
* **Material:** PBT (Polybutylene terephthalate) or ABS plastic for durability and heat resistance.
* **Bezel:** Designed for modularity; multiple units can be snapped together side-by-side to create multi-digit inputs (e.g., a 3-digit counter).
### Internal Contacts
* **Plating:** Usually **Gold-plated** or Silver-plated contacts to prevent oxidation and ensure reliable switching over thousands of cycles.
* **Wiper:** A rotating brush-like contact that moves across the stationary PCB tracks.
---
## 4. Application Context
These switches are primarily found in industrial control panels where a precise, non-volatile numerical setting is required:
1. **Timers/Counters:** Setting a specific duration or count limit.
2. **PLCs:** Providing manual parameter input to a Programmable Logic Controller.
3. **Industrial Machinery:** Calibration settings that must remain unchanged even if power is lost.
---
## 5. Wiring Diagram Example (BCD)
The back of the unit features several terminals. In a standard BCD configuration:
```text
Terminal | Function
---------|-------------------
C | Common (Input)
1 | Bit 0 (2^0)
2 | Bit 1 (2^1)
4 | Bit 2 (2^2)
8 | Bit 3 (2^3)
```
- ⤷
What is the difference between BCD and Decimal output versions of this switch?
- ⤷ Can these switches be illuminated for low-light environments?
- ⤷ What is the mechanical life expectancy (number of operations) for the W2TS series?