Description
The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Features
• 500W peak pulse capability at 10/1000μs waveform, repetition rate
   (duty cycles):0.01%
• VBR @ TJ= VBR@25°C x (1+α T x (TJ - 25))
   (α T:Temperature Coeffcient, typical value is 0.1%)
• Glass passivated chip junction in DO-15 Package
• Fast response time: typically less than 1.0ps from 0 Volts to BV min
• Excellent clamping capability
• Typical failure mode is short from over-specifed voltage or current
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2
• EFT protection of data lines in accordance with IEC 61000-4-4
• Low incremental surge resistance
• Typical IR less than 1μA when VBR max>13V
• High temperature to reflow soldering guaranteed:
   260°C/40sec/0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension
• Plastic package is flammability rated V-0 per Underwriters Laboratories
• Matte tin lead–free plated
• Halogen free and RoHS compliant
• Pb-free E3 means 2nd level interconnect is Pb-free and
   the terminal fnish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)

Applications
   TVS devices are ideal for the protection of I/O interfaces,
   VCC bus and other vulnerable circuits used in telecom,
   computer, industrial and consumer electronic applications.