FEATURES
• Wide operation voltage range
• Low on-resistance, 5.5 Ω (typical at 3 V)
• Low capacitance, 5.6 pF (typical)
• -3 dB high bandwidth with 5pF load:
700 MHz (typical)
• Low bit to bit skew: 40 pS (typical)
• Low power consumption
• Low logic threshold: V
• Power down protection: D+/D- pins can tolerate up to
5.5 V when V+ = 0 V
• Logic (S+ and S-) above V+ tolerance
• 5 kV ESD protection (HBM)
• Latch-up current 500 mA per JESD78
• Lead (Pb)-free low profile miniQFN-10 (1.4 mm x 1.8 mm
x 0.55 mm)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912

APPLICATIONS
• Cellular phones
• Portable media players
• PDA
• Digital camera
• GPS
• Notebook computer
• TV, monitor, and set top box

DESCRIPTION
DG2723 is a low RON, high bandwidth analog switch
configured in dual SPDT. It achieves 5.5 Ω switch on
resistance, greater than 700 MHz -3 dB bandwidth with 5 pF
load, and a channel to channel crosstalk at -36 dB and
isolation at -29 dB. Fabricated with high density sub
micro CMOS process, the DG2723 provides low parasitic
capacitance, handles bidirectional signal flow with
minimized phase distortion. Guaranteed 1.3 V logic high
threshold makes it possible to interface directly with low
voltage MCUs. The DG2723 is designed for a wide range of
operating voltages from 2.7 V to 5.5 V that can be driven
directly from one cell Li-ion battery. On-chip protection
circuit protects again fault events when signals at “com”
pins goes beyond V+.
Latch up current is 500 mA, as per JESD78, and its
ESD tolerance exceeds 5 kV. Packaged in ultra small
miniQFN-10 (1.4 mm x 1.8 mm x 0.55 mm), it is ideal for
portable high speed mix signal switching application.
As a committed partner to the community and the
environment, Vishay Siliconix manufactures this product
with lead (Pb)-free device termination. The miniQFN-10
package has a nickel-palladium-gold device termination
and is represented by the lead (Pb)-free “-E4” suffix to the
ordering part number. The nickel-palladium-gold device
terminations meet all JEDEC® standards for reflow and MSL
rating. As a further sign of Vishay Siliconix's commitment,
the DG2723 is fully RoHS complaint.