The MA200E12/17 module adapter board offers the following features:
• Dual channel IGBT driver together with 2ED300E17-SFO (detailed description in AN2007-05)
and 2ED300C17-S /-ST EiceDRIVER™
• Electrically and mechanically suitable for EconoDual™ 3 modules family
• Operating temperature (design target) minimum value -40°C
• Different gate resistor values for turning-on and -off are possible
• IGBTs are secured against temporary VCE overvoltages during turn-off (Active Clamping)
• Diodes for IGBT desaturation monitoring implemented (short circuit protection)
• All components, except connectors, are surface mounted devices (SMD) with lead free 260°C
soldering profile
• PCB is designed to fulfil the requirements of IEC61800-5-1, pollution degree 2, overvoltage category III
(creepage – 11 mm)
When the MA200E12/17 is not used with 2ED300E17-SFO adapter board and 2ED300C17-S /-ST
EiceDRIVER™ these following features might be useful:
• Gate-emitter amplifier input resistance is larger than 45 Ω
• Can be used with max. ±20V isolated power supply (due to IGBT short circuit performances a value of
max. +16V is suggested)
• Asymmetric power supply is also allowed e.g. -8 V and +16 V
• Input PWM voltage level should be selected according to power supply voltage level (in the same range
but not higher)