Axioline E, Digital I/O device, IO-Link ports Class A: 1, connection method: M12 connector (Acoded),
connection technology: 3-conductor, Digital inputs: 8, 24 V DC, connection technology:
4-conductor, Digital outputs: 8, 24 V DC, 2 A, connection technology: 3-conductor, IO-Link, with
safe signal path, degree of protection: IP65/IP67

Product Description
You can connect this Axioline E device to an IO-Link master via an IO-Link A port. You can use this device to acquire and output digital signals via
IO-Link. Use within different networks is possible via the IO-Link master. When using a safety relay module to shut down the supply voltage for the
output groups, you can shut down the outputs in a safety-related way. The outputs are then switched to the power off state independently of the
control signal.

Your advantages
• Connection to an IO-Link master with M12 connector (A-coded, 4-pos.)
• Type A port
• IO-Link specification V1.1.3
• Connection of up to 8 inputs with M12 connectors (A-coded, 5-pos.)
• Connection up to 8 outputs with M12 connectors (A-coded, 5-pos.)
• Passive safe outputs up to SIL 3 in accordance with IEC 61508, up to Cat. 4/PL e in accordance with EN ISO 13894-1
• Connection of actuator supply U_A1 and U_A2 with M12 connector (L-coded, 4-pos.)
• Diagnostic and status indicators
• Single-channel diagnostics
• Short-circuit and overload protection of the sensor supply
• Device rating plate stored
• IP65/IP67 degree of protection