Inline, Bus coupler, EtherCAT®, RJ45 jack, transmission speed in the local bus: 500 kbps / 2
Mbps, degree of protection: IP20, including Inline connector and labeling field

Product Description
The bus coupler is intended for use within an EtherCAT® network and represents the link to the Inline I/O system. Up to 63 Inline devices can be
connected to the bus coupler. EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Auotmation GmbH, Germany. A
corresponding ESI file is available for integrating the Inline station into the programming system. This file can be downloaded via the product at
phoenixcontact.net/products.

Your advantages
• 2 RJ45 connections
• Automatic addressing
• Station mapped as a modular EtherCAT^® device using a modular device profile (MDP)
• Acyclic data communication (mailbox protocols)
• SafetyBridge V3 supported
• Firmware can be updated