Features
– Configurable for Cut Through or Store And Forward data flow
– Device configurable through any of sRIO ports, I2
C, or JTAG
– Packet Trace. Each port provides the ability to match the first 160 bits
of any packet against up to 4 programmable comparison values to
copy the packet to a programmable output trace port
– Packet Filter. Each port also provides the ability to filter the packet
based on comparisons against these same 4 programmable values
mentioned above.
– Supports up to 10 simultaneous multicast masks – Broadcast support – Port Loopback Debug Feature – Software assisted error recovery, supporting hot swap – Ports may be individually turned off to reduce power – PMON counters for monitor and diagnostics. Per input port and
output port counters.
– SerDes physical diagnostic registers
– Embedded PRBS generation and detection with programmable polynomials support Bit Error Rate (BER) testing
– 0.13um technology
– Low power dissipation
– Full JTAG Boundary Scan Support (IEEE1149.1 & 1149.6)
– Package: 324-ball grid array, 19mm x 19mm, 1.0mm ball pitch