1.1 Features
Ultra-Low Power Technology
 1.6 V to 5.5 V operation from a single supply
 Stop (RAM retained): 0.23 µA, (LVD enabled): 0.31
µA
 Snooze: 0.70 mA (UART), 1.20 mA (ADC)
 Operating: 66 µA/MHz
16-bit RL78 CPU Core
 Delivers 41 DMIPS at maximum operating frequency
of 32 MHz
 Instruction Execution: 86% of instructions can be
executed in 1 to 2 clock cycles
 CISC Architecture (Harvard) with 3-stage pipeline
 Multiply Signed & Unsigned: 16 x 16 to 32-bit result in
1 clock cycle
 MAC: 16 x 16 to 32-bit result in 2 clock cycles
 16-bit barrel shifter for shift & rotate in 1 clock cycle
 1-wire on-chip debug function
Main Flash Memory
 Density: 48 KB to 64 KB
 Block size: 1 KB
 On-chip single voltage flash memory with protection
from block erase/writing
 Self-programming with secure boot swap function
and flash shield window function
Data Flash Memory
 Data Flash with background operation
 Data flash size: 4 KB
 Erase Cycles: 1 Million (typ.)
 Erase/programming voltage: 1.8 V to 5.5 V
RAM
 4 KB size
 Supports operands or instructions
 Back-up retention in all modes
High-speed On-chip Oscillator
 32 MHz with +/ 1% accuracy over voltage (1.8 V to
5.5 V) and temperature (20 °C to 85 °C)
 Pre-configured settings: 32 MHz, 24 MHz, 16 MHz,
12 MHz, 8 MHz, 6 MHz, 4 MHz, 3 MHz, 2 MHz,
and 1 MHz
Reset and Supply Management
 Power-on reset (POR) generator
 Low voltage detection (LVD) with 14 setting options
(Interrupt and/or reset function)
Multiple Communication Interfaces
 Up to 3 x simplified I2
C
 Up to 3 x CSI/SPI (7-, 8-bit)
 Up to 3 x UART (7-, 8-, 9-bit)
Extended-Function Timers
 Multi-function 16-bit timers: Up to 8 channels
 Interval Timer: 12-bit, 1 channel
 15 kHz watchdog timer : 1 channel (window function)
Rich Analog
 ADC: Up to 8 channels, 10-bit resolution, 2.1 µs
conversion time
 Supports 1.6 V
 Internal voltage reference (1.45 V)
Safety Features (IEC or UL 60730 compliance)
 Flash memory CRC calculation
 RAM parity error check
 RAM write protection
 SFR write protection
 Illegal memory access detection
 Clock stop/ frequency detection
 ADC self-test
General Purpose I/O
 5V tolerant, high-current (up to 20 mA per pin)
 Open-Drain, Internal Pull-up support
 Different potential interface support: Can connect to
a 1.8/2.5/3 V device
Operating Ambient Temperature
 Standard: 40 °C to +85 °C
Package Type and Pin Count
32-pin HWQFN (5 x 5 mm, 0.5 mm pitch)