This datasheet addendum is to be used in conjunction with the overall RC32012A datasheet. This addendum
indicates the register settings that are pre-configured in the internal One-Time Programmable (OTP) memory of
the device by Renesas. These register settings represent the default values the registers will take on power-up or
reset. Values may be changed at any time afterwards over the serial port, but any such changes will be lost when
the device is reset or power-cycled unless programmed into OTP as an additional or replacement configuration.
In addition, there are several other pieces of documentation that describe specific functions or details not covered
this document. Table 1 shows related documents.