|
Features
100 million multiply-accumulates per second (MMACS) with a 100 MHz clock at 3.3 V nominal
Data arithmetic logic unit (Data ALU) with fully pipelined 24 × 24-bit parallel multiplier-accumulator (MAC),
56-bit parallel barrel shifter (fast shift and normalization; bit stream generation and parsing), conditional
ALU instructions, and 24-bit or 16-bit arithmetic support under software control
Program control unit (PCU) with position-independent code (PIC) support, addressing modes optimized for
DSP applications (including immediate offsets), internal instruction cache controller, internal memoryexpandable
hardware stack, nested hardware DO loops, and fast auto-return interrupts
Direct memory access (DMA) with six DMA channels supporting internal and external accesses; one-, twoand
three-dimensional transfers (including circular buffering); end-of-block-transfer interrupts; and
triggering from interrupt lines and all peripherals
Phase-lock loop (PLL) allows change of low-power divide factor (DF) without loss of lock and output clock
with skew elimination
Hardware debugging support including On-Chip Emulation (OnCE‘) module, Joint Test Action Group
(JTAG) test access port (TAP)
Applications
The DSP56309 is intended for applications benefiting from a large amount of internal memory, such as wireless
infrastructure applications.
|