1. General description
The 74LVC32245A is a 32-bit transceiver featuring non-inverting 3-state bus compatible
outputs in both send and receive directions. The device features four output enable (nOE)
inputs for easy cascading and four send/receive (nDIR) inputs for direction control.
Pin nOE controls the outputs so that the buses are effectively isolated.
Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be
applied to the outputs. These features allow the use of these devices in mixed
3.3 V and 5 V applications.
To ensure the high-impedance state during power-up or power-down, pin nOE should be
tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by
the current-sinking capability of the driver.
2. Features and benefits
 5 V tolerant inputs/outputs for interfacing with 5 V logic
 Wide supply voltage range from 2.3 V to 3.6 V
 CMOS low power consumption
 MULTIBYTE flow-through standard pin-out architecture
 Low inductance multiple power and ground pins for minimum noise and ground
bounce
 Direct interface with TTL levels
 Inputs accept voltages up to 5.5 V
 High-impedance when VCC = 0 V
 Complies with JEDEC standard:
 JESD8-7A (1.65 V to 1.95 V)
 JESD8-5A (2.3 V to 2.7 V)
 JESD8-C/JESD36 (2.7 V to 3.6 V)
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115B exceeds 200 V
 CDM JESD22-C101E exceeds 1000 V
 Specified from 40 C to +85 C and 40 C to +125 C
 Packaged in plastic fine-pitch ball grid array package