KEY FEATURES
• Power input compatible with
3-phase PMG, single phase PMG,
auxiliary and shunt windings.
• 3-phase or single phase generator
output voltage sensing.
• CAN port providing J1939 communications.
• Soft start ramping.
• Under Frequency Roll Off (UFRO)
protection with optional
instantaneous step.
• Loss of voltage sensing protection.
• Over excitation protection.
• Remote voltage adjustment.
- 5 kΩ potentiometer with
open circuit protection.
- -10 V DC to 10 V DC.
• DIP switch selection for 6 configurations and 2 stability ranges.
• Potentiometer adjustment for
voltage set points, droop, UFRO,
proportional and integral gain.
• LED indication for fault and
operating status.
• Configurable via DSE Configuration
Suite PC software connected via
the DSE815 configuration interface.
• Chassis mountable potted
enclosure.
• Spade terminals for simple
connection.